TeraFlex Trail Recovery Kit
The TeraFlex Trail Recovery Kit comes with all the essential recovery tools needed for the most common pulling tasks packed in our heavy-duty tool & gear bag. This kit is a bargain compared to buying each item separately. Don’t go out on any trail without this essential recovery kit in the back of your Jeep®!
INCLUDES: HD Tool & Gear Bag, 30’x2” Recovery Tow Strap w/ 20,000-lb. rating, 7’x3” Recovery Tree Strap w/ a 20,000-lb. rating, (2) D-Ring Shackles, Air Deflator Key Chain.
- TeraFlex Trail Recovery Kit – Complete
TeraFlex HD Tool & Gear Bag
The premium TeraFlex HD Tool & Gear Bag is made from high-quality 600-denier nylon material with a heavy-duty 3/8” slider zipper reinforced with 1” webbing to prevent zipper separation. Features a reinforced internal metal frame for additional strength at zipper points, heavy-duty double-stitched web handle straps, bar tacking at all stress points, and a padded bottom. Also features eight exterior pockets and nine interior pockets to store small items.
Features & Benefits:
- Constructed from high-quality 600-denier nylon material
- HD 3/8” slider zipper reinforced w/ 1” webbing to prevent zipper separation
- Reinforced internal metal frame for additional strength at zipper points
- HD double-stitched web handle straps
- Bar tacking at all stress points
- Padded bottom
- 8 exterior pockets and 9 interior pockets to store small items
HD Tool & Gear Bag:
- HD Tool & Gear Bag – Each
TeraFlex Recovery Tow Strap – 30' x 2"
The TeraFlex Recovery Tow Strap is for those unlikely situations where you must pull out your rescue gear – for your buddy of course. Use the Recovery Tow Strap with the Recovery Tree Strap (# 4800101) as a winch point to pull your buddy’s rig out while protecting Mother Nature.
The 30’ long by 2” wide Recovery Tow Strap features a 20,000-pound rating, red “stress thread” for a visual warning of possible strap failure, and reinforced stitched loop ends.
- Recovery Tow Strap – 30' x 2" – Each
TeraFlex Recovery Tree Strap – 7' x 3"
The TeraFlex Recovery Tree Strap is for those unlikely situations where you must pull out your rescue gear – for your buddy of course. Protect Mother Nature by wrapping the Recovery Tree Strap around a tree as a winch point and then use the Recovery Tow Strap (# 4800100) to pull your buddy’s rig out.
The 7’ long by 3” wide Recovery Tree Strap features a 20,000-pound rating, red “stress thread” for a visual warning of possible strap failure, and reinforced stitched loop ends.
- Recovery Tree Strap – 7' x 3" – Each
Recovery D-Ring Shackle
Complete your bumper with these universal Recovery D-Ring Shackles. The zinc plated shackles provide an attachment for connecting looped ends of straps and snatch blocks. Sold individually — 2 required per vehicle.
SPECS: 3/4” body | 7/8” pin diameter | 1-1/4” opening
- Recovery D-Ring Shackle – Each
TeraFlex Air Deflator Key Chain
The TeraFlex Air Deflator Keychain is a must-have for any trail vehicle. Airing down your tires increases traction and handling off-road. A keychain ring keeps them close at hand. Constructed from zinc-plated steel for durability.
- Air Deflator Key Chain – Each
D-Ring Mounts
Many bumpers do not include a mounting point for recovery D-ring shackles. These universal D-Ring Mounts work with most aftermarket bumpers. Bolts to the factory frame mounting points with the bumper.
D-Ring Mounts
RockGuard Aluminum Winch Hawse Fairlead
Protect your nylon/synthetic winch cable from sharp edges with this TeraFlex RockGuard Aluminum Winch Hawse Fairlead for the RockGuard Epic or RockGuard Explorer Front Bumpers. May fit other aftermarket bumpers.
Features & Benefits:
- Protects nylon/synthetic winch cable from sharp edges
- For use w/ RockGuard Epic Front Bumper w/ Center or Offset Drum Winch
- Constructed from 6061-T6 aluminum for durability
- Black powder-coated finish for corrosion resistance
- TeraFlex logo etched on top and bottom
Specs:
- Length: 15”
- Height: 2.874”
- Width: 1”
- Mounting Holes: 10”
RockGuard Aluminum Winch Hawse Fairlead:
- Aluminum Winch Hawse Fairlead – Each
JK: RockGuard Winch Mount Kit – Explorer Front Bumper
The TeraFlex JK: RockGuard Explorer Front Bumper Winch Mount Kit is required to add an offset bolt pattern winch to the Explorer Front Bumper.
Features & Benefits:
- Constructed from reinforced 1/4”-thick steel.
- Offset bolt pattern fits all major winches w/ offset bolt pattern — including larger Warn Powerplant
- Required to add an offset bolt pattern winch to the RockGuard Explorer Front Bumper (w/ Hoop: # 4653170 | No Hoop: # 4653120)
RockGuard Winch Plate Kit:
- JK: RockGuard Winch Plate Kit