JL 2dr: Falcon SP2 3.5 aDAPT Piggyback Shock Kit (0-1.5" Lift)
Gain more control over your suspension tuning with the Falcon SP2 3.5 aDAPT Piggyback Shocks! These shocks can be programmed to automatically switch from Soft to a manually preselected Firm setting depending on terrain.
Gain more control over your suspension tuning with the Falcon SP2 3.5 aDAPT Piggyback Shocks! In addition to the 8-Position Dial these shocks can be programmed to automatically switch from Soft to a manually preselected Firm setting depending on terrain. The aDAPT Control Module–s 3-position In-Cab Switch includes Soft Firm and Auto settings. SP2 3.5 aDAPT: • SP2 3.5 aDAPT Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics • In Auto Setting the aDAPT Control Module automatically switches from Soft to a manually preselected Firm setting based on driver selectable minimum G" threshold • The desired Firm setting is controlled manually by the 8-Position Dial • aDAPT Control Module adjustment parameters: forward acceleration lateral acceleration braking • Each parameter is set separately • Firm mode duration can be set between 1-5 seconds • 3-position In-Cab Switch settings include: Soft Firm Auto • Can also be manually adjusted from Soft to preset Firm setting • Using the Falcon App multiple presets can be created and used for different driving conditions • Calibrate aDAPT Control Module for various install orientations • SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings • Ideal for daily driven Jeeps as well as the serious enthusiast wanting automatic control and advanced tuning options from the driver seat JL: • JL corner-specific shock absorber w/ race-inspired performance • Front lower offset eyelet design provides maximum shock body to frame clearance during articulation • Rear roost guards prevent shock shaft damage from rocks kicked up by the tires Piggyback: • Piggyback design increases oil and gas capacity for reduced heat • Flows 6x more oil than restrictive reservoir hose designs • Eliminates common leakage issues found in banjo and swivel fittings • Front shocks– unique horizontal piggyback reservoir increases tire clearance
4.5 Hours install time
SP2 Mode Adjust: • Choose between Soft and Performance modes during install • Tunes both compression and rebound • Soft mode allows a partial bypass of the main piston for a softer ride • During aggressive driving, Soft mode retains performance tuning for optimal handling • Soft mode recommended for rough terrain/surfaces and cold weather • Performance mode recommended for max on- and off-road handling, stability, and control Jeep Performance Shocks: • Vehicle-specific shock absorbers • Race-inspired performance for increased vehicle stability • Improved dynamic roll control and low-speed damping • Dramatic improvement in on-road comfort and off-road performance • Optimized fitment for unobstructed suspension travel and articulation • 2.3" shock body provides optimal performance • 6061-T6 aluminum alloy shock body resists Impact to protect internal components • Smooth honed internal shock body surface for long-term performance • 3/4" induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling • Large shaft diameter provides a wide range of adjustment on adjustable shocks • Hard anodized 6061-T6 aluminum alloy billet piston • 1-piece Teflon bronze piston wear band w/ O-ring • VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume • VOD reduces shock bottoming at full compression or over uneven terrain • OGS (Oil/Gas Separator) prevents cavitation • High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures • Synthetic formula also contains special anti-wear and lubricity agents • 1,000-hour salt spray corrosion resistance test on all hardware • Serviceable and rebuildable (factory serviced) • Designed, engineered, and assembled in-house from domestic and globally sourced components • Patented design • 3-year warranty
• JL Wrangler (2-door) • 0-1.5" Lift • Does NOT fit EcoDiesel models
• Does NOT fit EcoDiesel models. • Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders – See instructions for proper configuration for your application. • May require 2” Bump Stop Strike Pad Extension Kit (# 1959500) and/or 0.5” Bump Stop Strike Pad Shim Kit(s) (# 1959300).
We found other products you might like!