JT: Extended-Travel System (1.5”+ Rear Lift)

Extended-Travel System: • Extended-Travel System safely provides 16” of rear suspension travel • For use w/ extended-travel Falcon Shocks (3.5–4.5” Lift) Extended-Travel Axle Bracket Kit – Rear Upper Control Arms: • Eliminates pinion dive during full droop w/ extended-travel Falcon Shocks (3.5–4.5” Lift) • Corrects rear suspension geometry and improves handling and ride quality on vehicles w/ 1”+ rear lift • Relocates rear upper control arm axle mounts • Bolt-on Extended-Travel Axle Brackets install between factory axle mounts and rear upper control arms • Welded and powder coated steel brackets • High-quality OEM grade coatings on all components to prevent rust and corrosion Forged ST Sway Bar Kit – Rear: • Allows for up to 16" of wheel travel • Relocates the sway bar from the axle to the frame to prevent damage to the sway bar • For use w/ extended-travel Falcon Shocks (3.5–4.5” Lift) • Provides same stability as factory rear sway bar • Requires a minimum of 2” rear bump stop • Forged and heat-treated 4140 Rear Sway Bar w/ hex head design • Features curved Forged Sway Bar Arms for clearance through full suspension movement • OEM-style Teflon-coated Sway Bar Bushings for reduced noise and long life • Includes Rear Sway Bar Links, Frame Mounting Brackets, and extruded aluminum Axle Mounting Brackets 1.5” Driveshaft Lowering Kit – Rear: • Lowers the rear driveshaft center support mount to improve driveshaft angles during full droop • For use w/ extended-travel Falcon Shocks (3.5–4.5” Lift) Coil Spring Retainer Kit – Rear Upper & Rear Lower: • Rear Coil Spring Retainers prevent the springs from unseating during full suspension travel Brake Line Anchor Kit – Rear: • Clamps around rear sway bar link and brake line for easy installation • Anchors can be positioned for best fit and clearance • Molded rubber construction safely and securely retains brake line • Molded rubber also features a recessed channel for vehicle speed sensor wire

• JT Gladiator (pickup) w/ 1.5”+ Rear Lift

• REQUIRES aftermarket wheels w/ 4.75” backspacing or less — or 1.75” Wheel Offset Adapter Kit (# 1057000) for stock wheels — NOT INCLUDED. • Does NOT work w/ the 13” Rear Sway Bar Link Kit (# 1774300). • REQUIRES a minimum of 2.5” Rear Bump Stop/Strike Pad Extensions/Shims. • Sport/Overland fenders REQUIRE 3” Front and 2.5” Rear Bump Stop/Strike Pad Extensions/Shims (NOT INCLUDED) to fit 35” tires. • Rubicon/Mojave fenders REQUIRE 2” Front and 2.5” Rear Bump Stop/Strike Pad Extensions/Shims (NOT INCLUDED) to fit 37” tires.