JT: Falcon SP2 3.1 Piggyback Shock Kit (0-1.5" Lift)
Falcon SP2 3.1 Piggyback Shocks deliver increased stability, improved ride quality, and comfort on road, while the increased compression damping provides more aggressive off-road handling. Optimized for on- and off-road driving.
Falcon SP2 3.1 Piggyback Shocks deliver increased stability improved ride quality and comfort on road while the increased compression damping provides more aggressive off-road handling. SP2 3.1 Shocks have been optimized for on- and off-road driving. High-Value Performance" is the driving force behind our vehicle-specific dampers for Jeeps trucks and SUVs. These Jeep-specific shock absorbers deliver increased stability improved ride quality and comfort for daily-driven vehicles as well as race-inspired performance handling and stability for off-road rigs. Falcon Performance Shocks by TeraFlex. SP2 3.1 Piggyback Shocks • SP2 3.1 Piggyback Shocks deliver increased stability improved ride quality and comfort on road while the increased compression damping provides more aggressive off-road handling • Optimized tuning for on- and off-road driving • SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings • Ideal for daily-driven Jeeps as well as the serious enthusiast wanting a consistent controlled feel through all driving conditions JT Performance Shocks: • JT corner-specific shock absorber w/ race-inspired performance • Front lower offset eyelet design provides maximum shock body to frame clearance during articulation • Rear roost guards prevent shock shaft damage from rocks kicked up by the tires • SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings Falcon Series 3 Piggyback Shocks: • Piggyback design increases oil and gas capacity for reduced heat • Flows 6x more oil than restrictive reservoir hose designs • Eliminates common leakage issues found in banjo and swivel fittings • Front shocks– unique horizontal piggyback reservoir increases tire clearance • Cartridge Upgrade Kits are available separately – contact customer service for details
Write Your Own Review
SP2 Mode Adjust Shocks: • Choose between Soft and Performance modes during install • Tunes both compression and rebound • Soft mode allows a partial bypass of the main piston for a softer ride • During aggressive driving, Soft mode retains performance tuning for optimal handling • Soft mode recommended for rough terrain/surfaces and cold weather • Performance mode recommended for max on- and off-road handling, stability, and control Falcon Performance Shocks (all): • Vehicle-specific shock absorbers • Race-inspired performance for increased vehicle stability • Improved dynamic roll control and low-speed damping • Dramatic improvement in on-road comfort and off-road performance • Optimized fitment for unobstructed suspension travel and articulation • 2.3" shock body provides optimal performance • 6061-T6 aluminum alloy shock body resists Impact to protect internal components • Smooth honed internal shock body surface for long-term performance • 3/4" induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling • Large shaft diameter provides a wide range of adjustment on adjustable shocks • Hard anodized 6061-T6 aluminum alloy billet piston • 1-piece Teflon bronze piston wear band w/ O-ring • VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume • VOD reduces shock bottoming at full compression or over uneven terrain • OGS (Oil/Gas Separator) prevents cavitation • High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures • Synthetic formula also contains special anti-wear and lubricity agents • 1,000-hour salt spray corrosion resistance test on all hardware • Serviceable and rebuildable (factory serviced) • Designed, engineered, and assembled in-house from domestic and globally sourced components • Patented design • 3-year warranty
Vehicle(s): • JT Gladiator (pickup) • JT Gladiator Mojave (pickup) w/ Front Shock Bushing Kit (# 61-99-01-001) • Does NOT fit EcoDiesel models Specs: • 0–1.5” Lift
• JT Gladiator Mojave models REQUIRE JT Mojave: Front Shock Bushing Kit (# 61-99-01-001). These Bushings feature a larger inside diameter (I.D.) to fit the larger front shock mounting posts on the Mojave model. • Does NOT fit EcoDiesel models. • Upgradeable to 3.5 aDAPT or 3.5 e-Adjust or 3.3 Fast Adjust via Cartridge Upgrade Kits for quick compression adjustments. Sold separately — contact customer service for details. • Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders — See instructions for proper configuration for your application.
We found other products you might like!