All-New Falcon Series 3.3 Fast Adjust & 3.1 Piggyback & Series 2.1 Monotube Shock Absorbers!

Falcon

JK Wrangler | JKU Wrangler Unlimited

Series 3.3 Fast Adjust | Series 3.1 | Series 2.1

Shock Absorbers

Falcon Series 3 Piggyback and Series 2 Monotube shock absorbers are engineered to meet the unique requirements of the JK Wrangler and JKU Wrangler Unlimited. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs.

The Falcon Shocks lineup includes the Series 3.3 Fast Adjust Piggyback shock absorbers with 10 damper settings, the fixed-rate Series 3.1 Piggyback shock absorbers, and the fixed-rate Series 2.1 Monotube shock absorbers. 

Falcon Performance Shocks are the new benchmark in shock absorber development! 

Series 3 Piggyback

Falcon Series 3 Piggyback shock absorbers feature increased oil and gas capacity compared to monotube or twin-tube designs as well as increased oil flow over restrictive reservoir hose designs All this adds up to reduced heat buildup for more consistent performance. 

Series 3 Piggyback  

Common Features & Benefits:

• Piggyback design features increased oil & gas capacity vs. monotube or twin-tube designs reducing heat buildup for more consistent performance
• Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose designs as well as eliminates common leakage issues found in banjo & swivel fittings 
• Front shocks feature unique piggyback design w/ horizontal reservoir to increase clearance for large tires 
• Rear shock body & reservoir positioned on bottom eliminates shaft damage caused by rocks kicked up by the tires

Series 3.3 Fast Adjust Piggyback

Falcon Series 3.3 Fast Adjust Piggyback Shock Absorbers feature a three-position Fast Adjust Knob to change the damping settings from soft to firm, while the middle setting incorporates an eight-position Micro Adjust Dial for more precise tuning between soft and firm. 

Series 3.3 Fast Adjust  

Features & Benefits:

• Fast Adjust Knob w/ 3 compression settings for large damping adjustments
• Micro Position Dial w/ 8 compression settings for precise damping adjustments

INCLUDES:

• Series 3.3 Fast Adjust Piggyback Shock Absorbers - all 4
• All necessary hardware 

JK 2-DOOR 

SERIES 3.3 FAST ADJUST PIGGYBACK SHOCK ABSORBERS

JK Series 3.3 - 0-2” Lift

JK Series 3.3 - 2.5-3.5” Lift

JK Series 3.3 - 4-6” Lift

JKU 4-DOOR 

SERIES 3.3 FAST ADJUST PIGGYBACK SHOCK ABSORBERS

JKU Series 3.3 - 0-2” Lift

JKU Series 3.3 - 2.5-3.5” Lift

JKU Series 3.3 - 4-6” Lift

Series 3.1 Piggyback

Fixed-rate Falcon Series 3.1 Piggyback Shock Absorbers feature increased oil and gas charge capacity compared to monotube or twin-tube designs for less heat buildup for more consistent performance. 

Series 3.1  

Features & Benefits:

• Fixed rate damping optimized for on- & off-road driving

INCLUDES:

• Series 3.1 Piggyback Shock Absorbers - all 4
• All necessary hardware

JK 2-DOOR 

SERIES 3.1 PIGGYBACK SHOCK ABSORBERS

JK Series 3.1 - 0-2” Lift

JK Series 3.1 - 2.5-3.5” Lift

JK Series 3.1 - 4-6” Lift

JKU 4-DOOR 

SERIES 3.1 PIGGYBACK SHOCK ABSORBERS

JKU Series 3.1 - 0-2” Lift

JKU Series 3.1 - 2.5-3.5” Lift

JKU Series 3.1 - 4-6” Lift

Series 2.1 Monotube

Fixed-rate Falcon Series 2.1 Monotube Shock Absorbers are engineered to deliver increased stability, improved ride quality, and comfort for daily driven Jeeps in a compact and affordable package.

Series 2.1  

Features & Benefits:

• Fixed rate damping optimized for on- & off-road driving
• Rear shock body positioned on bottom eliminates shaft damage caused by rocks kicked up by the tires

INCLUDES:

• Series 2.1 Monotube Shock Absorbers - all 4
• All necessary hardware 

JK 2-DOOR 

SERIES 2.1 MONOTUBE SHOCK ABSORBERS

JK Series 2.1 - 1.5-2” Lift

JK Series 2.1 - 2.5-3.5” Lift

JK Series 2.1 - 4-6” Lift

JKU 4-DOOR 

SERIES 2.1 MONOTUBE SHOCK ABSORBERS

JKU Series 2.1 - 1.5-2” Lift

JKU Series 2.1 - 2.5-3.5” Lift

JKU Series 2.1 - 4-6” Lift

JK/JKU Falcon Shock Absorbers 

Common Features & Benefits:

• JK/JKU corner-specific shock absorbers w/ race inspired performance

• Increases vehicle stability 
• Improved dynamic roll control & low-speed damping

• Optimized fitment for clearance during full suspension travel & articulation 
• Front offset stud design provides maximum shock body to frame clearance during articulation 
• Outboard mounting increases clearance for lifted vehicles w/ raised track bar brackets

• 6061-T6 aluminum alloy shock body resists wear & protects internal components while providing superior heat dissipation 
• Smooth honed internal shock body surface for long-term performance 
• 2.25” diameter shock body provides optimal performance 
• Largest shock body that will fit w/out modifications

• 3/4” diameter induction hardened chrome plated shaft resists rock damage & corrosion as well as prevents shaft buckling 
• Maximum shaft diameter allows for more precise tuning 
• Hard anodized billet piston 
• 1-piece Teflon bronze piston wear band w/ O-ring 
• Digressive linear piston & base valve technology 
• Inline OGS Oil/Gas Separator prevents cavitation

• Red Line full synthetic shock oil with a high viscosity index of 519 for consistent performance across all temperatures & reduced shock fade 
• The synthetic formula also contains special anti-wear & lubricity agents for excellent thermal stability 
• 1,000-hour salt spray corrosion resistance test on the hard anodized coating and all hardware

• Serviceable & rebuildable (factory serviced) 
• Built in-house at the TeraFlex Falcon Shocks Division 
• Patent pending design 
• 3-year warranty

Check out the links above for more details about the new JK/JKU Falcon shock absorbers!

- Jason Udy