JK: SpeedBump Bump Stop Kit – Front & Rear (3" Lift)

SKU 1958300
Up Down

This item ships for free! (Continental U.S. only)

TeraFlex SpeedBump bump stops are an innovative composite bump stop system designed for high-performance JK Wrangler applications. The true progressive nature of the SpeedBump bump stop allows for the reduction of suspension compressing impacts and the associated harsh bump stop bottoming. The absorption of harsh impacts experienced off-road or even on a poorly maintained highway will reduce the risk of axle housing bends as well as provide an increased ability to maintain vehicle control. TeraFlex SpeedBumps feature performance tuned closed-cell nitrogen charged microcellular polyurethane technology providing a true progressive bump stop that will not fade or dissipate under extended heavy use. Microcellular polyurethane technology is not affected by temperature extremes, and retains thermal and sub-zero temperature flexibility. The Delrin acetal resin polymer shaft is self-lubricating to allow thousands of continuous cycles without wear or abrasion. The external shaft seal further prolongs shaft life by wiping and cleaning the shaft to prevent contaminants from entering the SpeedBump housing.

The maintenance free SpeedBumps require no custom adjustment or tuning. The simple bolt on installation REQUIRES removal of the factory bump stop bell (front applications only) no welding is required.

This kit includes two front SpeedBump and two rear SpeedBump bump stops, front adjustment spacers, and front lower bump stop strike pads.

Weight:  14.0 lbs

Vehicle Type:
JK Wrangler
JKU Wrangler Unlimited

Others Also Bought:
Log in to review this item!
June 3rd 2016
Aaron Pyle
I knew right away when I decided to go with the Teraflex lift kit I was going to put these on as well. When I find a company that makes quality products I try to do as much with them as possible and with all that Teraflex makes, especially when it comes to Jeeps, I want to have mine perform as good as it can. The only issue I had is the right side of the Jeep does lean a little more so the factory strike pad was resting on the bump stop a little so I ordered some Teraflex strike pads to replace the factory ones. Have not been able to get them installed so for now I just cut down the factory ones to create some room until I can get things figured out.
September 3rd 2016
Josh Hawkins
I just installed these and they are awesome. The instructions and the install video made this really straight forward.