TeraFlex has released its first wave of suspension lift systems and accompanying components for the all-new 2020 Jeep Gladiator (JT).

TeraFlex is releasing everything from our very clean 1.5” Performance Spacer Leveling Kit all the way up to our full 8-arm 2.5” Alpine RT2 Short Arm Suspension System complete with front and rear HD Forged Adjustable Track Bars, front SpeedBump Bump Stops, and our new IR (Independent Rotation) Bushings. Oh, and we also have Falcon Performance Shocks all tuned up and ready to transform your JT Gladiator into a trail-gobbling machine.

2.5" Suspension Systems (33–35" Tires)

2.5” Alpine RT2 Short Arm Suspension System

TeraFlex Alpine RT (Rogue Trail) Suspension Systems build on our already capable Alpine CT (Cross-Trail) Suspension Systems. These systems include all our top-of-the-line components.

2032000 – JT: 2.5" Alpine RT2 Short Arm Suspension System – No Shocks

2032000 – JT: 2.5" Alpine RT2 Short Arm Suspension System – No Shocks

The 2.5” Alpine RT2 Short Arm Suspension System features Alpine IR Short Control Arms with our all-new Independent Rotation (IR) Bushings. These adjustable control arms and bushings team up to give your rig an unprecedented smooth and quiet ride both on- and off-road. The included Front SpeedBump Bump Stops also take the hard hits out of those unexpected trail surprises.

Adjustable Alpine IR Short Control Arms balance front caster angle and pinion angles and optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 0–4.5” lifts.

In addition to optimizing suspension geometry, adjustable Alpine IR Short Control Arms feature our all-new Independent Rotation (IR) Bushings. These innovative bushings remove bushing bind during full suspension travel for less overall bushing load during articulation resulting in unrestricted droop as well as a noticeable ride improvement whether on the highway or the trail.

The Front and Rear HD Forged Adjustable Track Bars improve steering response, center the axle to optimize vehicle roll center, and reduce body roll for unsurpassed handling.

Alpine RT Suspension Systems are for the Jeeper who wants it all!

  • 2032000 – JT: 2.5" Alpine RT2 Short Arm Suspension System – No Shocks

2.5” Alpine CT2 Short Arm Suspension System

TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems.

2022000 – JT: 2.5" Alpine CT2 Short Arm Suspension System – No Shocks

2022000 – JT: 2.5" Alpine CT2 Short Arm Suspension System – No Shocks

The 2.5” Alpine CT2 Short Arm Suspension System was designed for enthusiast who wants to fine-tune their suspension. Alpine Short Control Arms allow tuning of the caster and pinion angles, centering of the axles in the wheel wells, and wheelbase adjustment. The zero-maintenance adjustable control arms make the Alpine CT2 the perfect all-around suspension system.

Our adjustable Alpine Short Control Arms balance front caster angle and pinion angles and optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 0–4.5” lifts.

The Front HD Forged Adjustable Track Bar improves steering response, centers the axle to optimize vehicle roll center, and reduces body roll for unsurpassed handling.

Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!

  • 2022000 – JT: 2.5" Alpine CT2 Short Arm Suspension System – No Shocks

2.5” Sport ST2 Spring & Spacer Lift System

2012000 – JT: 2.5" Sport ST2 Spring & Spacer Lift System – No Shocks

These all-inclusive TeraFlex Sport ST (Street & Trail) Suspensions Systems deliver true street & trail (ST) performance and capability in a dependable and maintenance-free package.

Developed for the Jeep enthusiast looking for a stable highway commute and comfortable trail performance, the 2.5” Sport ST2 Spring & Spacer Lift System’s front lift coil springs and rear lift coil spring spacers have minimal impact on factory suspension geometry. The microcellular Progressive Bump Stops prevent tire contact and shock bottoming.

Sport ST Spring & Spacer Lift Systems feature front lift coil springs and rear lift coil spring spacers, bump stops, and front sway bar quick disconnects optimized for stated lift height as well as tire and component clearance. The Sport ST2 has minimal impact on factory suspension geometry and retains factory highway ride and handling.

Sport ST Suspension Systems can be installed on Friday, wheeled on Saturday, and driven to church on Sunday!

  • 2012000 – JT: 2.5" Sport ST2 Spring & Spacer Lift System – No Shocks

2.5–3.5" Lift Kits and 1.5" Leveling Kit

3.5" Base Lift Kits

TeraFlex 3.5" Base Lift Kits include just the basic lift components only and don’t have the drivability of a full suspension system. Requires front control arm Sport Brackets or longer front lower control arms or adjustable control arms and/or an adjustable front track bar to correct suspension geometry.

  • 1365000: JT: 3.5" Coil Spring Base Lift Kit – No Shocks
  • 1375300: JT: 3.5" Performance Spacer Lift Kit – No Shocks

2.5" Base Lift Kits

These ultra-simple TeraFlex 2.5" Base Lift Kits are the most economical way to fit larger tires to increase ground clearance for better off-road capability without compromising on road handling. These kits feature the basic parts required with the fewest modifications.

  • 1364000 – JT: 2.5" Coil Spring & Spacer Lift Kit – No Shocks
  • 1375200 – JT: 2.5" Performance Spacer Lift Kit – No Shocks

1.5” Performance Spacer Leveling Kit

 

 

 

1155300 – JT: 1.5” Performance Spacer Leveling Kit – No Shocks

Even when reality demands that you keep your JT Gladiator family-friendly, TeraFlex will satisfy your primal need to go big. Our JT: 1.5” Performance Spacer Leveling Kit allows you to run a larger tire with added clearance on the trail, all while maintaining family-friendly versatility.

Additionally, the extra height helps compensate for heavier aftermarket bumpers and winch, a larger spare tire, or weekend gear.

  • 1155300 – JT: 1.5" Performance Spacer Leveling Kit – No Shocks

Adjustable Short Control Arms (0–4.5" Lift)

TeraFlex's adjustable Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JT Gladiator models with 0–4.5” lifts. Bolts to the factory control arm mounting brackets. Can be added to any existing suspension lift. Short Control Arms are available in sets of eight or in pairs.

Alpine IR Short Arms

Alpine IR Short Control Arms feature our innovative, maintenance-free Independent Rotation (IR) Bushings that provide unrestricted rotation and flex as well as excellent NVH damping to improve on- and off-road ride quality and performance.

  • 1417550 – JT: Alpine IR Short Arm Kit – 8-Arm (0–4.5" Lift)

Alpine Short Arms

Our standard Alpine Short Control Arms feature high-quality, dependable, maintenance-free, factory-style bushings that provide excellent NVH (noise, vibration, harshness) damping and ride quality.

  • 1417500 – JT: Alpine IR Short Arm Kit – 8-Arm (0–4.5" Lift)

Lift Coil Springs

TeraFlex Lift Coil Springs are perfectly engineered for your JT Gladiator. Our engineers focused on extensive rate tuning and dynamic balance between front and rear load bias to produce Lift Coil Springs that deliver unsurpassed highway handling and off-road performance.

Front springs are available in 3.5" and 2.5" lift heights, while rear springs are available in a 2.5" lift height. Sold in pairs.

  • JT: Lift Coil Spring Pairs

SpeedBump & Progressive Bump Stop Kits

TeraFlex Bump Stop Kits add additional protection to your suspension over the factory bump stops, which can deform during hard compression and suspension movement.

Proper bump stop length and/or bump stop strike pad height is crucial for preventing damage to axle housing tubes, suspension components, shock absorbers, and fenders.

  • 1968352 – JT: 2"-Stroke SpeedBump & Progressive Bump Stop Kit – Front & Rear (2.5–3.5" Lift)
  • 1958325 – JL | JT: 3"-Stroke SpeedBump Bump Stop Kit – Front (4.5" Lift)
  • 1953752 – JL | JT | JK: 2”-Stroke SpeedBump Bump Stop Kit – Front (2.5–3.5” Lift)
  • 1969200 – JT: Progressive Bump Stop Kit – Front & Rear (0–4.5" Lift)

Front Sway Bar Quick Disconnect Kit (0–4.5" Lift)

1764000 – JL | JT: Front Sway Bar Quick Disconnect Kit (0–4.5" Lift)

1764000 – JL | JT: Front Sway Bar Quick Disconnect Kit (0–4.5" Lift)

TeraFlex Front Sway Bar Quick Disconnects are the industry leader thanks to their ease of use. The Sway Bar Links quickly disconnect and swing up out of the way for unrestricted axle articulation during off-roading. While connected for street use, the link provides an immediate reaction during sway bar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber sway bar link bushings.

The upper sway bar link end has an OEM-quality polyurethane shoulder ball and socket for silent operation, long-term durability, and zero maintenance. The lower sway bar link end features a large polyurethane ball that slides over a stainless steel pin for easy sway bar link removal.

  • 1764000 – JL | JT: Front Sway Bar Quick Disconnect Kit (0–6" Lift)

Check out all our TeraFlex Suspension Lifts, Off-Road Performance Parts, and Jeep Accessories HERE!

— — — SKUs, components, and pricing are subject to change. See the website descriptions for the latest information. — — —

— Words by Jason Udy