TeraFlex JL: Alpine Long Control Arms and Alpine Long Arm Brackets (NOT INCLUDED) provide complete alignment adjustability and dependability for maximum performance on JL Wrangler/Unlimited models with 3-6" lifts. Can be added to any existing suspension lift.
High-quality dependable maintenance-free factory-style bushings provide excellent NVH damping and ride quality.
Must be used with Alpine Long Arm Bracket Kit (JL 2-Door: 1958002 or JL 4-Door: # 1958000) - NOT INCLUDED.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product color=5476,features_benefits=JL Alpine Long Control Arms:
- Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits
- Alpine Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
- On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during droop and shock load transferred through the Alpine Long Control Arms
- Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength w/ reduce NVH compared to other long arm kits
JL Alpine Control Arms (all):
- Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
- Full range of movement will not restrict articulation or flex off-road
- High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality
- Zero maintenance forged threaded joints for smooth quiet flex
- Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance
- Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
- Install and drive simple bolt-on installation - no welding required
- TeraFlex Lifetime Warranty against defects
,fitment_info=Fits:
- JL Wrangler (2-door)
- JL Wrangler Unlimited (4-door)
- 3-6" Lift
Control Arm Specs:
- Tube Diameter & Wall = 50mm x 5mm
- Factory Length = 19-3/4"
- Min. Length = 35-3/4"
- Max. Length = 37-1/4"
- Both Ends = 9/16" (14mm) Bolt
,height=4.5,installation_time=2 Hours,length=39.5,product_image_size=Default,product_notes=- Long Control Arms (Alpine IR: # 1310505 or Alpine: # 1316005) MUST be used w/ Alpine Long Arm Bracket Kit (JL 2dr: # 1958002 or JL 4dr: # 1958000) - NOT INCLUDED.
- REQUIRES cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.
- Alignment REQUIRED.
,size=5518,sw_featured=No,width=9.5