2.5" Trail Select Sport Kit With Falcon 1.1 Shocks JL Wrangler 2018-2026
2.5" Trail Select Sport Kit with Falcon 1.1 Shocks JL Wrangler 2018-2026.
- - A complete suspension system built for daily-driven Jeep JKs.
- - Delivers a smooth, composed street ride with confident handling and durability for light trail use, featuring tuned Falcon 1.1 shocks for balanced on- and off-road performance.
- - For Diesel, 4xe, 392 and 2 door applications, call CS 801-713-3314
Fitment and Installation Notes
- - Not for use on 4xe, Diesel, or 392 vehicles.
- - Application Note: Not for use on 4xe, Diesel, 392, or Mojave vehicles.
- - Requires aftermarket wheels with 4.75" backspacing or less
- - OR offset wheel adapters (#1057000) required when using factory wheels
- - Alignment required after installation
Description
2.5" Trail Select Sport Kit with Falcon 1.1 Shocks JL Wrangler 2018-2026.
- - A complete suspension system built for daily-driven Jeep JKs.
- - Delivers a smooth, composed street ride with confident handling and durability for light trail use, featuring tuned Falcon 1.1 shocks for balanced on- and off-road performance.
- - For Diesel, 4xe, 392 and 2 door applications, call CS 801-713-3314
Fitment and Installation Notes
- - Not for use on 4xe, Diesel, or 392 vehicles.
- - Application Note: Not for use on 4xe, Diesel, 392, or Mojave vehicles.
- - Requires aftermarket wheels with 4.75" backspacing or less
- - OR offset wheel adapters (#1057000) required when using factory wheels
- - Alignment required after installation
2.5" Trail Select Sport Kit with Falcon 1.1 Shocks JL Wrangler 2018-2026.
Designed as a complete, pre-engineered suspension system, Trail Select Sport removes the guesswork from upgrading by delivering the right components, matched to work together for confident daily driving and long-term reliability. The Trail Select 2.5" Sport Suspension System is designed for JL Wrangler owners who want improved stance, refined ride quality, and dependable performance - without added complexity or ongoing adjustment.
Engineered primarily for daily driving with light off-road use, the Sport Kit delivers a smooth, controlled ride on pavement while maintaining predictable handling and stability on dirt roads and mild trails. The 2.5" lift height provides added ground clearance and tire fitment while preserving confident road manners. Built with long-term reliability in mind, every component in the Trail Select Sport System is tuned to deliver consistent performance mile after mile - not just a lift that feels good out of the box.
Designed as a complete, bolt-on suspension system, the Trail Select Sport Kit offers a true install-and-drive solution for JL owners who want comfort, control, and confidence - without unnecessary upgrades or guesswork. Features & Benefits Lift Height: 2.5" Max Tire Diameter: 35" Tuned Falcon 1.1 monotube shocks for balanced on- and off-road performance Vehicle-specific coil springs for proper stance and ride quality Geometry-correcting components restore caster and steering stability Smooth, composed ride with reduced NVH Predictable handling for daily driving and weekend use
Simple bolt-on installation A complete suspension system built for daily-driven Jeep JKs. Delivers a smooth, composed street ride with confident handling and durability for light trail use, featuring tuned Falcon 1.1 shocks for balanced on- and off-road performance. For Diesel, 4xe, 392 and 2 door applications, call CS 801-713-3314
Fitment and Installation Notes
- - Vehicle Fitment
- - Fits all Jeep JL Wrangler models
- - 2018-UP
- - Application Note: Not for use on 4xe, Diesel, 392, or Mojave vehicles.
- - Product Notes
- - Designed as a complete, matched suspension system
- - Geometry correction components are tuned specifically for the 2.5" lift height
- - Requires aftermarket wheels with 4.75" backspacing or less
- - OR offset wheel adapters (#1057000) required when using factory wheels
- - Alignment required after installation
- Falcon 1.1 shocks
- 2.5" vehicle-specific coil springs
- Front lower caster-correcting Sport control arms
- Front & rear sway bar links
- Track bar brackets
- Bump stop extensions and strike pads
- Complete hardware for installation
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.



