2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit
2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit.
- - Our simple 2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit moves the vacuum pump safely and securely into the engine bay to remove any potential conflict with an aftermarket winch.
- - Our simple 2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit moves the vacuum pump safely and securely into the engine bay.
Fitment and Installation Notes
- - Some aftermarket front bumpers and/or winches for 2012-2018 JK Wrangler/Unlimited models with the 3.6-liter Pentastar V-6 require the vacuum pump to be relocated from the front crossmember to inside of the engine bay.
- - Some vacuum tube re-routing is required.
- - Required for RockGuard Epic Front Bumpers.
Description
2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit.
- - Our simple 2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit moves the vacuum pump safely and securely into the engine bay to remove any potential conflict with an aftermarket winch.
- - Our simple 2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit moves the vacuum pump safely and securely into the engine bay.
Fitment and Installation Notes
- - Some aftermarket front bumpers and/or winches for 2012-2018 JK Wrangler/Unlimited models with the 3.6-liter Pentastar V-6 require the vacuum pump to be relocated from the front crossmember to inside of the engine bay.
- - Some vacuum tube re-routing is required.
- - Required for RockGuard Epic Front Bumpers.
2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit.
Our simple 2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit moves the vacuum pump safely and securely into the engine bay. Our simple 2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit moves the vacuum pump safely and securely into the engine bay to remove any potential conflict with an aftermarket winch.
Fitment and Installation Notes
- - Color: 12mm X 100
- - Our simple 2012-2018 JK: Vacuum Pump Relocation Mount Bracket Kit moves the vacuum pump safely and securely into the engine bay.
- - Fitment: 2012-2018 JK Wrangler (2-door)
- - Fitment: 2012-2018 JK Wrangler Unlimited (4-door)
- - Fitment: with 3.6L Pentastar V6
- - Height: 4.75
- - Installation Time: 1 hour
- - Length: 12.25
- - Product Image Size: Default
- - Note: Some vacuum tube re-routing is required.
- - Note: Required for RockGuard Epic Front Bumpers.
- - Size: 2XL
- - Featured: No
- - Width: 6.5
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.

