Ford Bronco: HD Wear Adjustable Upper Ball Joint (2 Upper)
Ford Bronco: HD Wear Adjustable Upper Ball Joint (2 Upper).
- - Upgrade your Bronco's front-end confidence and capability with TeraFlex HD Adjustable Upper Ball Joints.
- - Engineered to endure with trail-proven precision.
Fitment and Installation Notes
- - Adjustable for wear and fully greaseable on-vehicle - no teardown required - these joints deliver smoother steering feel, improved alignment control, and articulation up to 94 degrees for lifted or flex-heavy builds.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. TeraFlex is NOT responsible for any damage or failure resulting from improper installation.Estimated Labor Time: 2 HoursInstallation Effort: 2 HoursHave a certified mechanic do it for you!
Description
Ford Bronco: HD Wear Adjustable Upper Ball Joint (2 Upper).
- - Upgrade your Bronco's front-end confidence and capability with TeraFlex HD Adjustable Upper Ball Joints.
- - Engineered to endure with trail-proven precision.
Fitment and Installation Notes
- - Adjustable for wear and fully greaseable on-vehicle - no teardown required - these joints deliver smoother steering feel, improved alignment control, and articulation up to 94 degrees for lifted or flex-heavy builds.
Ford Bronco: HD Wear Adjustable Upper Ball Joint (2 Upper).
When your Bronco takes the hard line, these joints take the hit. TeraFlex HD Adjustable Upper Ball Joints are built for drivers who expect more than stock durability - combining precise engineering with trail-tested grit for improved performance on and off the road. The large 30 mm metal-on-metal joint rides on a heat-treated chromoly stud and 1045 carbon-steel housing that shrugs off punishment. Dual helical grease grooves purge out grit with every pump, while the low-profile seal locks out contaminants for long, quiet service life.
Whether you're crawling rock, carving dunes, or driving daily, TeraFlex HD Ball Joints keep your Bronco precise, predictable, and ready for whatever the trail throws next. Engineered to endure with trail-proven precision. Features and benefits: Heat-treated chromoly stud built for strength under load 1045 carbon-steel housing with threaded ring for added durability Large 30 mm metal-on-metal design for tight steering and control Dual helical grease grooves push out old grease for longer life Low-profile seal keeps dirt and debris out
Zinc-iron coating protects against rust and corrosion Up to 94 degrees of articulation - ideal for lifted or flex-heavy setups Direct-fit design for OEM upper control arms Sealed for long-term reliability and quiet operation Upgrade your Bronco's front-end confidence and capability with TeraFlex HD Adjustable Upper Ball Joints. Built from heat-treated chromoly and 1045 carbon steel, these greaseable, wear-adjustable joints take the hits that stop stock parts cold - keeping your steering tight and your adventures on track. Engineered to endure with trail-proven precision.
Fitment and Installation Notes
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
TIRE/WHEEL SIZING GUIDE