Bronco Sway Bar & Transmission Skid Plate
Bronco Sway Bar & Transmission Skid Plate.
- - Protect your Bronco's Sway Bar and Transmission with trail and boulder skid protection.
- - Designed to replace the factory skid on hydraulic-equipped models while delivering improved strength and coverage.
- - Designed to replace the factory skid plate on equipped vehicles.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. TeraFlex is NOT responsible for any damage or failure resulting from improper installation.Estimated Labor Time: 0.5 HoursInstallation Effort: 0.5 HoursHave a certified mechanic do it for you!
Description
Bronco Sway Bar & Transmission Skid Plate.
- - Protect your Bronco's Sway Bar and Transmission with trail and boulder skid protection.
- - Designed to replace the factory skid on hydraulic-equipped models while delivering improved strength and coverage.
- - Designed to replace the factory skid plate on equipped vehicles.
Bronco Sway Bar & Transmission Skid Plate.
The TeraFlex Bronco Sway Bar & Transmission Skid Plate provides coverage protection for the pneumatic sway bar and the transmission. Designed for real-world off-road use, this 5mm skid plate strengthens one of the most vulnerable areas under the Bronco. On models equipped with the factory hydraulic sway bar, this skid can replace the OE skid plate while offering improved protection and coverage. Built for durability and trail confidence, it keeps critical components shielded when terrain gets serious.
Protect your Bronco's Sway Bar and Transmission with trail and boulder skid protection. Designed to replace the factory skid on hydraulic-equipped models while delivering improved strength and coverage. Designed to replace the factory skid plate on equipped vehicles.
- Full coverage protection for Sway Bar assembly
- Added Protection of the transmission
- Replaces factory skid on hydraulic-equipped models
- 5mm, steel plate for Stronger coverage than factory skid plate
- Designed for real off-road protection
- Direct bolt up installation
- Black powder coated
- What's Included
- Sway Bar / Transmission Skid Plate
- Mounting hardware
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
TIRE/WHEEL SIZING GUIDE