Delta Brake Kit - Front (8x6.5").

The TeraFlex Front Delta Brake Kit is the ultimate upgrade for Jeeps with oversized and heavier wheels/tire combos requiring increased braking performance. 100% bolt-on upgrade with basic hand tools Opposed 4-piston calipers with 2" front pistons 4-piece High-Modulus bridge caliper design combines heat-treated 4140 cast steel bridges with 6061-T6 forged aluminum piston housings

Fitment and Installation Notes

• - Delta Brake System:
• - Significantly improved braking performance over factory brake system
• - 100% bolt-on upgrade with basic hand tools
• - Balanced front to rear brakes tuned specifically for lifted vehicles
• - Brake bias and piston sizes optimized for all JL, JK, and JT models
• - Designed to work with stock proportioning valve and ABS
• - 3-year warranty
• - Calipers:
• - Opposed 4-piston calipers with 2" front pistons
• - Same flow rate as factory 2-piston calipers - 4 pistons move each side half the distance instead of 2 pistons only moving 1 side the full distance
• - EPDM synthetic boot material keeps water and other contaminants away from piston
• - Hard-chrome coating on piston reduces friction to improve performance
• - 4-piece High-Modulus bridge caliper design combines heat-treated 4140 cast steel bridges with 6061-T6 forged aluminum piston housings
• - Steel bridges resist bending/flex better than standard aluminum or cast iron
• - Improved stiffness = consistent brake feel/modulation during brake application and release
• - Low-profile bridge accepts 14" diameter rotors behind 17" wheels
• - 1,000-hour salt spray tested zinc- and E-dipped coating on bridges and mounts
• - 300,000 psi steel formed hardware
• - Built-in auto bleeding check ball, valve, and spring for easy bleeding
• - Hard-coat anodized, scratch-resistant piston bores
• - Rotors:
• - Massive 14" x 1.25" vented rotors offer more mechanical advantage for superior stopping performance
• - Heat-treated, heavy cast-iron rotors offer better heat absorption
• - Mill-balanced, slotted and vented rotors offer maximum gas and heat dissipation, respectively, compared to solid rotors
• - GEOMET coating on non-friction surfaces resists corrosion
• - Pads:
• - Proprietary composite-resin, semi-metallic pads provide excellent full temperature stopping power for maximum initial speed scrub with increased pad life and reduced noise and dust
• - Drop-in pad design - no need to disassemble calipers to replace pads
• - Fitment: Fits:
• - Fitment: JL Wrangler (2-door)
• - Fitment: JL Wrangler Unlimited (4-door)
• - Fitment: JT Gladiator (pickup)
• - Fitment: JK Wrangler (2-door)
• - Fitment: JK Wrangler Unlimited (4-door)
• - Fitment: Specs:
• - Fitment: Minimum Wheel Diameter: 17"
• - Fitment: Back Spacing: 4.75" or less
• - Fitment: MUST VERIFY FITMENT with DOWNLOADABLE TEMPLATE
• - Fitment: Bolt Pattern: 8x6.5"
• - Fitment: Stock Brake Rotor Reference:
• - Fitment: JL Sahara/Rubicon front: 12.9" x 1.1" (330mm x 28mm) vented rotors
• - Fitment: JL Sahara/Rubicon rear: 13.4" x 0.55" (342mm x 14mm) solid rotors
• - Fitment: JL Sport front: 12.9" x 0.94" (330mm x 24mm) vented rotors
• - Fitment: JL Sport rear: 12.9" x 0.47" (328mm x 12mm) solid rotors
• - Fitment: JT front: 12.9" x 1.1" (330mm x 28mm) vented rotors
• - Fitment: JT rear: 13.6" x 0.86" (345mm x 22mm) solid rotors
• - Fitment: JK front and rear: 11.9" x 1.1" (302mm x 28mm) vented rotors (U.S.-spec)
• - Height: 15.5
• - Installation Time: 4 Hours
• - Length: 15
• - Product Image Size: Default
• - Note: Requires a minimum wheel diameter of 17".
• - Featured: No
• - Width: 15

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.