JK 2dr: Falcon SP2 3.1 Piggyback Shock Kit (3-4.5'' Lift)
Falcon SP2 3.1 Piggyback Shocks deliver increased stability, improved ride quality, and comfort on road, while the increased compression damping provides more aggressive off-road handling. Optimized for on- and off-road driving.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product Description
Falcon SP2 3.1 Piggyback Shocks deliver increased stability, improved ride quality, and comfort on road, while the increased compression damping provides more aggressive off-road handling. Optimized for on- and off-road driving.
Details
Falcon SP2 3.1 Piggyback Shocks deliver increased stability, improved ride quality, and comfort on road, while the increased compression damping provides more aggressive off-road handling. SP2 3.1 Shocks have been optimized for on- and off-road driving. ''?"High-Value Performance'' is the driving force behind our vehicle-specific dampers for Jeeps, trucks, and SUVs. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs. Falcon Performance Shocks by TeraFlex. SP2 3.1 Piggyback: - SP2 3.1 Piggyback Shocks deliver increased stability, improved ride quality, and comfort on road, while the increased compression damping provides more aggressive off-road handling - Optimized tuning for on- and off-road driving - Ideal for daily driven Jeeps as well as the serious enthusiast wanting a consistent, controlled feel through all driving conditions JK Wrangler/Unlimited: - JK corner-specific shock absorber w/ race-inspired performance - Front upper offset stud design provides maximum shock body to frame clearance during articulation - Outboard mounting increases clearance for lifted vehicles w/ raised track bar brackets - Rear shock body (all) and reservoir (piggyback) positioned on bottom eliminates shaft damage from rocks kicked up by the tires - Rear Shock Skid Plates available separately Piggyback: - Piggyback design increases oil and gas capacity for reduced heat - Moving gas charge to piggyback reservoir allows maximum amount of travel - Flows 6x more oil than restrictive reservoir hose designs - Eliminates common leakage issues found in banjo and swivel fittings - Front shock''™s unique horizontal piggyback reservoir increases tire clearance - Cartridge Upgrade Kits are available separately ''" contact customer service for details
Installation
DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
Have a certified mechanic do it for you!
Additional Information
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
color=12mm X 100,features_benefits=SP2 Mode Adjust
- Choose between Soft and Performance modes during install
- Tunes both compression and rebound
- Soft mode allows a partial bypass of the main piston for a softer ride
- During aggressive driving, Soft mode retains performance tuning for optimal handling
- Soft mode recommended for rough terrain/surfaces and cold weather
- Performance mode recommended for max on
- and off-road handling, stability, and control Falcon Jeep Shocks (all):
- Vehicle-specific shock absorbers
- Race-inspired performance for increased vehicle stability
- Improved dynamic roll control and low-speed damping
- Dramatic improvement in on-road comfort and off-road performance
- Optimized fitment for unobstructed suspension travel and articulation
- 2.3'' shock body provides optimal performance (Series 2 and Series 3 Shocks)
- 2.125'' shock body for high value performance (1.1 Monotube Shocks
- 6061-T6 aluminum alloy shock body resists Impact to protect internal components
- Smooth honed internal shock body surface for long-term performance
- 3/4'' (Series 2 and Series 3 Shocks) or 1/2'' (1.1 Monotube Shock) induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
- Large shaft diameter provides a wide range of adjustment on adjustable shocks
- 1-piece energized Teflon bronze piston wear band
- VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
- VOD reduces shock bottoming at full compression or over uneven terrain
- OGS (Oil/Gas Separator) prevents cavitation
- Red Line oil for consistent performance across all temperatures
- Synthetic formula also contains special anti-wear and lubricity agents
- 1,000-hour salt spray corrosion resistance test on all hardware
- Serviceable and rebuildable (factory serviced)
- Designed, engineered, CNC machined, and assembled in-house from domestic and globally sourced components
- Patented design
- 1-year warranty,fitment_info=Vehicle(s):
- JK Wrangler (2-door) Specs: 3-4.5'' Lift,height=10,installation_time=1.5 Hours,length=37,product_image_size=Default,product_notes=
- Upgradeable to 3.5 aDAPT or 3.5 e-Adjust or 3.3 Fast Adjust via Cartridge Upgrade Kits for quick compression adjustments. Sold separately ''" contact customer service for details.
- Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders
- See instructions for proper configuration for your application.,size=2XL,sw_featured=No,width=27.5
Warning: This product can expose you to chemicals include [name of chemical], which [is/are] known to the State of California to case [cancer]/[birth defects or other reproductive harm]. For more information go to www.P65Warnings.ca.gov.


