Download TeraFlex Catalog!
My Vehicle
My Cart
Cart
MY VEHICLE
Search Products
Products
Search Products
main product photo

JK: Dana 30/44 HD Ball Joint Kit W/out Knurl - Upper & Lower - Set Of 4

In stock
SKU
3442002
Be the first to review this product
$307.99

Have a question? Please call 801-713-3314

TeraFlex JK: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Fits all JK Wrangler/Unlimited models with Dana 30 or Dana 44 front axles.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
  • TeraFlex JK: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels.
    Fits all JK Wrangler/Unlimited models with Dana 30 or Dana 44 front axles.

  • DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. TeraFlex is NOT responsible for any damage or failure resulting from improper installation.
    Estimated Labor Time: 4 hours
    Installation Effort: 4 hours
    999009 JK HD Dana 30 and 44 Ball Joints (75.00 kB)

    Have a certified mechanic do it for you!

  • WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

    features_benefits=- Heat treated 4140 chromoly ball/stud and 1045 carbon steel housing - Magnesium Phosphate coating to inhibit corrosion throughout Upper Ball Joint

    • Extremely hard sintered wear bushings to handle extreme side load demands w/out failure
    • Factory-style serrated flange nut and grease fitting Lower Ball Joint:
    • Hard alloy tool steel slotted wear plate for ball/stud to socket wear protection
    • Wear plate features dual helical grease channels for increased flow through entire joint ensuring longevity and predictable operation
    • Factory-style serrated flanged castle nut
    • Low-profile single lip dust seal prevents contaminants
    • 30mm (1.18") adjustable ball stud for accurate initial and future preload adjustments using simple hand tools
    • 2 grease zerk fittings allow greasing access from either side ,fitment_info=
    • JK Wrangler (2-door)
    • JK Wrangler Unlimited (4-door) ,height=5,installation_time=4 hours,installation_video=https://www.youtube.com/embed/SMi3fUH8wOs,https://www.youtube.com/embed/wF5cP44ENbk,length=6,product_image_size=Default,product_notes=
    • Ball Joints w/out Knurl won''™t score the inner knuckle and open the bore.
    • Ball Joints w/ Knurl are for inner knuckles that have a ''?"loose press fit'' due to repeated ball joint replacement and/or where knurled ball joints have been installed. ,sw_featured=No,width=5

Description
TeraFlex JK: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Fits all JK Wrangler/Unlimited models with Dana 30 or Dana 44 front axles.
Details
TeraFlex JK: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels.
Fits all JK Wrangler/Unlimited models with Dana 30 or Dana 44 front axles.
Installation
999009 JK HD Dana 30 and 44 Ball Joints (75.00 kB)

DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions

Have a certified mechanic do it for you!

Additional Information
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

features_benefits=- Heat treated 4140 chromoly ball/stud and 1045 carbon steel housing - Magnesium Phosphate coating to inhibit corrosion throughout Upper Ball Joint

  • Extremely hard sintered wear bushings to handle extreme side load demands w/out failure
  • Factory-style serrated flange nut and grease fitting Lower Ball Joint:
  • Hard alloy tool steel slotted wear plate for ball/stud to socket wear protection
  • Wear plate features dual helical grease channels for increased flow through entire joint ensuring longevity and predictable operation
  • Factory-style serrated flanged castle nut
  • Low-profile single lip dust seal prevents contaminants
  • 30mm (1.18") adjustable ball stud for accurate initial and future preload adjustments using simple hand tools
  • 2 grease zerk fittings allow greasing access from either side ,fitment_info=
  • JK Wrangler (2-door)
  • JK Wrangler Unlimited (4-door) ,height=5,installation_time=4 hours,installation_video=https://www.youtube.com/embed/SMi3fUH8wOs,https://www.youtube.com/embed/wF5cP44ENbk,length=6,product_image_size=Default,product_notes=
  • Ball Joints w/out Knurl won''™t score the inner knuckle and open the bore.
  • Ball Joints w/ Knurl are for inner knuckles that have a ''?"loose press fit'' due to repeated ball joint replacement and/or where knurled ball joints have been installed. ,sw_featured=No,width=5
 TIRE/WHEEL SIZING GUIDE
Warning: This product can expose you to chemicals include [name of chemical], which [is/are] known to the State of California to case [cancer]/[birth defects or other reproductive harm]. For more information go to www.P65Warnings.ca.gov.