JK: Falcon 1.1 Monotube Shock Kit (3-3.5" Lift).

Falcon 1.1 Monotube Shocks deliver increased stability, improved ride quality, and comfort for daily driven Jeeps in a compact and affordable package, and at a reduced cost. 1.1 Series Falcon Shocks have been optimized for on- and off-road driving. "High-Value Performance" is the driving force behind our vehicle-specific dampers for Jeeps, trucks, and SUVs.

These Jeep'specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles and light trail use. It's not necessary to sacrifice a stable and comfortable ride due to budget constraints, the Falcon 1.1 monotube shocks were designed with the adventure seeking commuter in mind. Falcon 1.1 series Monotube Shocks deliver increased stability and ride quality for daily driven Jeeps and light trail use, and they do it without breaking the bank, or sacrificing shock component quality.

Fitment and Installation Notes

• - Color: 12mm X 100
• - Vehicle-specific shock absorbers
• - Improved dynamic roll control and low-speed damping
• - Dramatic improvement in on-road comfort
• - Optimized fitment for unobstructed suspension travel and articulation - 6061-T6 aluminum alloy shock body resists Impact to protect internal components
• - Smooth honed internal shock body surface for long-term performance - 1-piece Teflon bronze piston wear band with O-ring
• - VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
• - VOD reduces shock bottoming at full compression or over uneven terrain
• - OGS (Oil/Gas Separator) prevents cavitation
• - Red Line synthetic oil with a high Viscosity Index for consistent performance across all temperatures
• - Synthetic formula also contains special anti-wear and lubricity agents
• - Serviceable and rebuildable (factory serviced)
• - Designed, engineered, and assembled in-house from domestic and globally sourced components - 1-year warranty
• - Fitment: JK Wrangler Specs: 3-3.5" Lift
• - Height: 4
• - Installation Time: 1.5 Hours
• - Length: 37
• - Product Image Size: Default
• - Note: Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders
• - Note: See instructions for proper configuration for your application.
• - Size: 2XL
• - Featured: No
• - Width: 14

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.