JK: Vented Brake Rotor - Front - Each
JK: Vented Brake Rotor - Front - Each.
- - This TeraFlex JK: Slotted Brake Rotor is a direct replacement for either rotor in our Front Big Brake Kit with Vented Rotors (# 4303400) and Front Performance Big Rotor Kit with Vented Rotors (# 4303480).
- - Improved braking performance over factory brake system
- - Larger 13.3" rotors for superior stopping performance (vs. 11.9" stock rotors)
- - Mill-balanced vented rotors for maximum heat dissipation
Fitment and Installation Notes
- - Requires a minimum of 17" diameter wheels.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.Have a certified mechanic do it for you!
Description
JK: Vented Brake Rotor - Front - Each.
- - This TeraFlex JK: Slotted Brake Rotor is a direct replacement for either rotor in our Front Big Brake Kit with Vented Rotors (# 4303400) and Front Performance Big Rotor Kit with Vented Rotors (# 4303480).
- - Improved braking performance over factory brake system
- - Larger 13.3" rotors for superior stopping performance (vs. 11.9" stock rotors)
- - Mill-balanced vented rotors for maximum heat dissipation
Fitment and Installation Notes
- - Requires a minimum of 17" diameter wheels.
JK: Vented Brake Rotor - Front - Each.
This TeraFlex JK: Slotted Brake Rotor is a direct replacement for either rotor in our Front Big Brake Kit with Vented Rotors (# 4303400) and Front Performance Big Rotor Kit with Vented Rotors (# 4303480).
Fitment and Installation Notes
- - Color: 12mm X 100
- - Improved braking performance over factory brake system
- - Larger 13.3" rotors for superior stopping performance (vs. 11.9" stock rotors)
- - Mill-balanced vented rotors for maximum heat dissipation
- - Rotors feature dual bolt patterns: 5x5" and 5x5.5"
- - Fitment: JK Wrangler (2-door)
- - Fitment: JK Wrangler Unlimited (4-door)
- - Height: 3
- - Length: 15
- - Product Image Size: Default
- - Note: Requires a minimum of 17" diameter wheels.
- - Size: 2XL
- - Featured: No
- - Width: 15
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
Have a certified mechanic do it for you!
installation_video=https://www.youtube.com/embed/EkXMsHpUQ-Y https://www.youtube.com/embed/zoIbJUd83XQ https://www.youtube.com/embed/L3_6zIR8ODs
TIRE/WHEEL SIZING GUIDE