JL 2dr: 3.5" Alpine CT3 Long Arm Suspension System - No Shocks

In stock
SKU
1523100
$4,404.93

Have a question? Please call 801-713-3314

JL 2dr: 3.5" Alpine CT3 Long Arm Suspension System - No Shocks.

  • - A 3.5" suspension system opens up a new world of tire sizes and off-road possibilities.
  • - Lift Height: 3.5"
  • - Sport/Sahara Fenders: 35" Tires
  • - Rubicon Fenders: 35-37" Tires

Fitment and Installation Notes

  • - Does NOT include shocks.
  • - Falcon shocks and steering stabilizers sold separately.
  • - Requires aftermarket wheels with 4.75" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.
  • - Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35" or larger tires.
  • - Sport/Sahara Fenders Require 3" Front And 2.5" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35" tires.

See the full product description and installation notes for additional requirements and compatibility details.

  • JL 2dr: 3.5" Alpine CT3 Long Arm Suspension System - No Shocks.

    TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems.

    A 3.5" suspension system opens up a new world of tire sizes and off-road possibilities. If you have that do it all" attitude one of our 3.5" Alpine CT3 Suspension Systems will make it happen. The Alpine CT3 Long Arm features our Alpine Long Control Arms & Brackets as well as a Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets for maximum tunability and flawless performance for years to come.

    Adjustable Alpine Long Control Arms balance front caster and pinion angles as well as optimize rear pinion angles anti-squat geometry and tire position on vehicles with 3-6" lifts. On higher lifts Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms.

    The Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets improve steering response center the axles to optimize vehicle roll center and reduce body roll for improved handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).

    Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort! A 3.5" suspension system opens up a new world of tire sizes and off-road possibilities. If you have that do it all" attitude, our 3.5" Alpine CT3 Long Arm will make it happen. Features maximum tunability and performance.

    Fitment and Installation Notes

    - Does NOT include shocks. We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Falcon shocks and steering stabilizers sold separately.
    - Requires aftermarket wheels with 4.75" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.
    - Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35" or larger tires.
    - Sport/Sahara Fenders Require 3" Front And 2.5" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35" tires.
    - Rubicon Fenders require 2" Front and 2" Rear Bump Stop Extensions (INCLUDED) to fit 35" tires.
    - Rubicon Fenders require 2.5" Front and 3" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 37" tires.
    - Alignment required.
    - Requires longer shocks (NOT INCLUDED)
    - Falcon Performance Shocks recommended.
    • - Alpine CT3:
    • - Lift Height: 3.5"
    • - Sport/Sahara Fenders: 35" Tires
    • - Rubicon Fenders: 35-37" Tires
    • - CT Long Arm Suspension Systems:
    • - Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits
    • - Alpine Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
    • - On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms
    • - Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits
    • - Long Arm Suspension Crossmember provides additional strength
    • - Cross-Trail:
    • - Delivers true Cross-Trail (CT) performance
    • - Positive, responsive handling with reduced NVH
    • - High-quality, maintenance-free factory'style bushings provide excellent vibration damping and ride quality
    • - Front HD Forged Adjustable Track Bar and Front (3.5"+) and Rear Track Bar Axle Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for improved handling
    • - Front and Rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
    • - Features Front Sway Bar Quick Disconnects
    • - Full range of movement for off-road flex and articulation
    • - Install and drive, simple bolt-on installation - no welding required
    • - TeraFlex Limited Lifetime Warranty against defects
    • - Fitment: Fits:
    • - Fitment: JL Wrangler (2-door)
    • - Fitment: Specs:
    • - Fitment: Lift Height: 3.5"
    • - Fitment: Max Tire Diameter:
    • - Fitment: Sport/Sahara Fenders: 35" (with 3" front & 2.5" rear bump stops)
    • - Fitment: Rubicon Fenders: 35" (with 2" front & 2" rear bump stops)
    • - Fitment: Rubicon Fenders: 37" (with 2.5" front & 3" rear bump stops)
    • - Height: 23
    • - Installation Time: 27.5 Hours (28.5 Hours w/ shocks)
    • - Length: 41
    • - Product Image Size: Default
    • - Note: Requires aftermarket wheels with 4.75" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.
    • - Note: Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35" or larger tires.
    • - Note: Sport/Sahara Fenders Require 3" Front And 2.5" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35" tires.
    • - Note: Rubicon Fenders require 2" Front and 2" Rear Bump Stop Extensions (INCLUDED) to fit 35" tires.
    • - Note: Rubicon Fenders require 2.5" Front and 3" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 37" tires.
    • - Note: Alignment required.
    • - Note: Requires longer shocks (NOT INCLUDED)
    • - Note: Falcon Performance Shocks recommended.
    • - Featured: No
    • - Width: 30
  • WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

  • SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

  • ADDITIONAL SERVICES & COSTS MAY BE REQUIRED

    INSTALLATION ALIGNMENT NOTE
    Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
    Additional alignment costs may apply.

    INSTALLATION HEADLAMP AIM NOTE
    Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
    Additional headlamp adjustment costs may apply.

    ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
    If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
    This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
    Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
    Additional ADAS calibration costs may apply.


    DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. TeraFlex is NOT responsible for any damage or failure resulting from improper installation.
    Estimated Labor Time: 27.5 Hours (28.5 Hours w/ shocks)
    Installation Effort: 27.5 Hours (28.5 Hours w/ shocks)

    Have a certified mechanic do it for you!


Description

JL 2dr: 3.5" Alpine CT3 Long Arm Suspension System - No Shocks.

  • - A 3.5" suspension system opens up a new world of tire sizes and off-road possibilities.
  • - Lift Height: 3.5"
  • - Sport/Sahara Fenders: 35" Tires
  • - Rubicon Fenders: 35-37" Tires

Fitment and Installation Notes

  • - Does NOT include shocks.
  • - Falcon shocks and steering stabilizers sold separately.
  • - Requires aftermarket wheels with 4.75" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.
  • - Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35" or larger tires.
  • - Sport/Sahara Fenders Require 3" Front And 2.5" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35" tires.

See the full product description and installation notes for additional requirements and compatibility details.

Details

JL 2dr: 3.5" Alpine CT3 Long Arm Suspension System - No Shocks.

TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems.

A 3.5" suspension system opens up a new world of tire sizes and off-road possibilities. If you have that do it all" attitude one of our 3.5" Alpine CT3 Suspension Systems will make it happen. The Alpine CT3 Long Arm features our Alpine Long Control Arms & Brackets as well as a Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets for maximum tunability and flawless performance for years to come.

Adjustable Alpine Long Control Arms balance front caster and pinion angles as well as optimize rear pinion angles anti-squat geometry and tire position on vehicles with 3-6" lifts. On higher lifts Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms.

The Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets improve steering response center the axles to optimize vehicle roll center and reduce body roll for improved handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).

Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort! A 3.5" suspension system opens up a new world of tire sizes and off-road possibilities. If you have that do it all" attitude, our 3.5" Alpine CT3 Long Arm will make it happen. Features maximum tunability and performance.

Fitment and Installation Notes

- Does NOT include shocks. We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Falcon shocks and steering stabilizers sold separately.
- Requires aftermarket wheels with 4.75" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.
- Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35" or larger tires.
- Sport/Sahara Fenders Require 3" Front And 2.5" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35" tires.
- Rubicon Fenders require 2" Front and 2" Rear Bump Stop Extensions (INCLUDED) to fit 35" tires.
- Rubicon Fenders require 2.5" Front and 3" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 37" tires.
- Alignment required.
- Requires longer shocks (NOT INCLUDED)
- Falcon Performance Shocks recommended.
F&B
  • - Alpine CT3:
  • - Lift Height: 3.5"
  • - Sport/Sahara Fenders: 35" Tires
  • - Rubicon Fenders: 35-37" Tires
  • - CT Long Arm Suspension Systems:
  • - Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits
  • - Alpine Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
  • - On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms
  • - Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits
  • - Long Arm Suspension Crossmember provides additional strength
  • - Cross-Trail:
  • - Delivers true Cross-Trail (CT) performance
  • - Positive, responsive handling with reduced NVH
  • - High-quality, maintenance-free factory'style bushings provide excellent vibration damping and ride quality
  • - Front HD Forged Adjustable Track Bar and Front (3.5"+) and Rear Track Bar Axle Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for improved handling
  • - Front and Rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
  • - Features Front Sway Bar Quick Disconnects
  • - Full range of movement for off-road flex and articulation
  • - Install and drive, simple bolt-on installation - no welding required
  • - TeraFlex Limited Lifetime Warranty against defects
  • - Fitment: Fits:
  • - Fitment: JL Wrangler (2-door)
  • - Fitment: Specs:
  • - Fitment: Lift Height: 3.5"
  • - Fitment: Max Tire Diameter:
  • - Fitment: Sport/Sahara Fenders: 35" (with 3" front & 2.5" rear bump stops)
  • - Fitment: Rubicon Fenders: 35" (with 2" front & 2" rear bump stops)
  • - Fitment: Rubicon Fenders: 37" (with 2.5" front & 3" rear bump stops)
  • - Height: 23
  • - Installation Time: 27.5 Hours (28.5 Hours w/ shocks)
  • - Length: 41
  • - Product Image Size: Default
  • - Note: Requires aftermarket wheels with 4.75" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.
  • - Note: Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35" or larger tires.
  • - Note: Sport/Sahara Fenders Require 3" Front And 2.5" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35" tires.
  • - Note: Rubicon Fenders require 2" Front and 2" Rear Bump Stop Extensions (INCLUDED) to fit 35" tires.
  • - Note: Rubicon Fenders require 2.5" Front and 3" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 37" tires.
  • - Note: Alignment required.
  • - Note: Requires longer shocks (NOT INCLUDED)
  • - Note: Falcon Performance Shocks recommended.
  • - Featured: No
  • - Width: 30
CA Prop65 Warning

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

Safety & Warnings

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Installation

ADDITIONAL SERVICES & COSTS MAY BE REQUIRED

INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.

INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.

ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.


DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. TeraFlex is NOT responsible for any damage or failure resulting from improper installation.

Have a certified mechanic do it for you!