TeraFlex JL: Alpine Long Control Arms and Alpine Long Arm Brackets (NOT INCLUDED) provide complete alignment adjustability and dependability for maximum performance on JL Wrangler/Unlimited models with 3-6" lifts. Can be added to any existing suspension lift.
High-quality dependable maintenance-free factory-style bushings provide excellent NVH damping and ride quality.
Must be used with Alpine Long Arm Bracket Kit (JL 2-Door: 1958002 or JL 4-Door: # 1958000) - NOT INCLUDED.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

color=12mm X 100,features_benefits=JL Alpine Long Control Arms

• Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits
• Alpine Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
• On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during droop and shock load transferred through the Alpine Long Control Arms
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength w/ reduce NVH compared to other long arm kits JL Alpine Control Arms (all):
• Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
• Full range of movement will not restrict articulation or flex off-road
• High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality
• Zero maintenance forged threaded joints for smooth quiet flex
• Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance
• Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
• Install and drive simple bolt-on installation
• no welding required
• TeraFlex Lifetime Warranty against defects ,fitment_info=Fits:
• JL Wrangler (2-door)
• JL Wrangler Unlimited (4-door)
• 3-6" Lift Control Arm Specs:
• Tube Diameter & Wall = 42mm x 4mm
• Factory Length = 17.425"
• Min. Length = 20"
• Max. Length = 21-1/2"
• Both Ends = 9/16" (14mm) Bolt ,height=4.5,installation_time=2 Hours,length=39.5,product_image_size=Default,product_notes=
• Long Control Arms (Alpine IR: # 1310505 or Alpine: # 1316005) MUST be used w/ Alpine Long Arm Bracket Kit (JL 2dr: # 1958002 or JL 4dr: # 1958000)
• NOT INCLUDED.
• REQUIRES cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.
• Alignment REQUIRED. ,size=2XL,sw_featured=No,width=9.5