JL: Control Arm Replacement Hardware.

Sometimes it's just nice to start with fresh hardware and eliminate any control arm bolt failure concerns. Replacement factory control arm hardware Kit Class 10.9 high strength steel bolts Automotive, OEM, corrosion resistant coatings Passes 1000 hr salt spray

Fitment and Installation Notes

• - Color: 12mm X 100
• - The JL control arm bolts can become damaged over time due to the extreme torque specs required by the Factory specifications, and even stretched after with repeated removal and installation.
• - Sometimes it's just nice to start with fresh hardware and eliminate any control arm bolt failure concerns.
• - Replacement factory control arm hardware Kit
• - Class 10.9 high strength steel bolts
• - Automotive, OEM, corrosion resistant coatings
• - Passes 1000 hr salt spray
• - Fitment: All Jeep JL factory length control arm bolts
• - Height: 3.5
• - Length: 9.5
• - Product Image Size: Default
• - Note: All necessary hardware is included
• - Note: The bolts are not the same thread pitch that Jeep provides from the factory. You must use the bolts and nuts that are provided with the kit.
• - Size: 2XL
• - Featured: No
• - Width: 5.5

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.