JL / JT 3.6L: Crankcase Vent System Kit
JL / JT 3.6L: Crankcase Vent System Kit.
- - The TeraFlex JL / JT 3.6L: Crankcase Vent System Kit (CVS) prevents oil from being drawn into the intake while driving on extreme inclines.
- - Prevents oil from entering PCV system and intake when on steep inclines
- - Prevents burning oil/smoke, hydro lock, burnt starters, internal engine damage, etc.
- - Utilizes existing oil fill in valve cover to add a front PCV valve to existing system
Fitment and Installation Notes
- - EPA LEGAL: Our Crankcase Vent System Kit (CVS) meets the EPA Anti-Tampering Policy reasonable basis for emissions criteria and can be sold in U.S. states which don't require a California Air Resources Board (C.A.R.B) Executive Order (E.O.) for aftermarket, performance, and add-on parts.
- - Left-Hand Drive models ONLY - does NOT fit Right-Hand Drive models.
- - Does NOT fit JL Wrangler/Unlimited or JT Gladiator models with 2.0-liter Turbo I-4, 3.0-liter EcoDiesel V-6, or 392/6.4-liter Hemi V-8.
- - Does NOT fit JK Wrangler/Unlimited with 3.6-liter Pentastar V-6.
- - Does NOT fit 2.0-liter Turbo I-4, 3.0-liter EcoDiesel V-6, or 392/6.4-liter Hemi V-8
Description
JL / JT 3.6L: Crankcase Vent System Kit.
- - The TeraFlex JL / JT 3.6L: Crankcase Vent System Kit (CVS) prevents oil from being drawn into the intake while driving on extreme inclines.
- - Prevents oil from entering PCV system and intake when on steep inclines
- - Prevents burning oil/smoke, hydro lock, burnt starters, internal engine damage, etc.
- - Utilizes existing oil fill in valve cover to add a front PCV valve to existing system
Fitment and Installation Notes
- - EPA LEGAL: Our Crankcase Vent System Kit (CVS) meets the EPA Anti-Tampering Policy reasonable basis for emissions criteria and can be sold in U.S. states which don't require a California Air Resources Board (C.A.R.B) Executive Order (E.O.) for aftermarket, performance, and add-on parts.
- - Left-Hand Drive models ONLY - does NOT fit Right-Hand Drive models.
- - Does NOT fit JL Wrangler/Unlimited or JT Gladiator models with 2.0-liter Turbo I-4, 3.0-liter EcoDiesel V-6, or 392/6.4-liter Hemi V-8.
- - Does NOT fit JK Wrangler/Unlimited with 3.6-liter Pentastar V-6.
- - Does NOT fit 2.0-liter Turbo I-4, 3.0-liter EcoDiesel V-6, or 392/6.4-liter Hemi V-8
JL / JT 3.6L: Crankcase Vent System Kit.
On steep inclines, engine oil flows to the rear of the engine and valve covers. At extreme angles, the factory PCV system allows engine vacuum to draw oil through the PCV valve and intake into the combustion chamber. This causes exhaust smoke from the burning oil and possibly hydro locking the engine and other internal damage.
The TeraFlex JL / JT 3.6L: Crankcase Vent System Kit (CVS) prevents oil from being drawn into the intake while driving on extreme inclines. Adds a second PCV valve to the front of the engine via an oil fill cap adapter and a T-fitting.
Fitment and Installation Notes
- - Color: 12mm X 100
- - Prevents oil from entering PCV system and intake when on steep inclines
- - Prevents burning oil/smoke, hydro lock, burnt starters, internal engine damage, etc.
- - Utilizes existing oil fill in valve cover to add a front PCV valve to existing system
- - Oil fill cap to crankcase vent adapter connects to existing PCV system via a T-fitting
- - Emissions compliant
- - PCV function is unchanged
- - Ball Check Valve System cuts the flow of oil ensuring oil is kept away from the intake
- - Retains OEM oil cap function and use
- - Easy install
- - Patent Pending
- - Fitment: Vehicle(s):
- - Fitment: JL Wrangler (2-door)
- - Fitment: JL Wrangler Unlimited (4-door)
- - Fitment: JT Gladiator (pickup)
- - Fitment: Specs:
- - Fitment: Engine: 3.6-liter Pentastar V-6 ONLY
- - Fitment: Left-Hand Drive models ONLY - does NOT fit Right-Hand Drive models
- - Fitment: Does NOT fit 2.0-liter Turbo I-4, 3.0-liter EcoDiesel V-6, or 392/6.4-liter Hemi V-8
- - Height: 4
- - Installation Time: 1 Hour
- - Length: 24
- - Product Image Size: Default
- - Note: EPA LEGAL: Our Crankcase Vent System Kit (CVS) meets the EPA Anti-Tampering Policy reasonable basis for emissions criteria and can be sold in U.S. states which don't require a California Air Resources Board (C.A.R.B) Executive Order (E.O.) for aftermarket, performance, and add-on parts.
- - Note: Left-Hand Drive models ONLY - does NOT fit Right-Hand Drive models.
- - Note: Does NOT fit JL Wrangler/Unlimited or JT Gladiator models with 2.0-liter Turbo I-4, 3.0-liter EcoDiesel V-6, or 392/6.4-liter Hemi V-8.
- - Note: Does NOT fit JK Wrangler/Unlimited with 3.6-liter Pentastar V-6.
- - Size: 2XL
- - Featured: No
- - Width: 4
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
Have a certified mechanic do it for you!
installation_video=https://www.youtube.com/embed/EI9MvvwFVDg

