google-site-verification: google8ee6fe80660b689c.html

JL: Track Bar Bracket Kit – Rear Lower (2.5–4.5” Lift) – RHD

In stock
SKU
1953601
$115.99

Have a question? Please call 801-713-3314

The TeraFlex JL: Rear Lower Track Bar Bracket Kit corrects vehicle roll center, restores factory handling, and reduces body roll on lifted JL Wrangler/Unlimited models. Bolts to the rear axle track bar mount.
  • The TeraFlex JL: Rear Lower Track Bar Bracket Kit corrects vehicle roll center, restores factory handling, and reduces body roll on lifted JL Wrangler/Unlimited models.

    Multiple mounting locations allow neutral lateral alignment of the rear axle of JL models with 2.5–4.5” lifts. Includes a Track Bar Bracket Spacer. Bolts to the rear axle track bar mount.

  • • Track Bar Bracket – Rear Lower w/ multiple track bar mounting holes

    • Track Bar Bracket Spacer

    • All necessary hardware
  • SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

  • ADDITIONAL SERVICES & COSTS MAY BE REQUIRED

    INSTALLATION ALIGNMENT NOTE
    Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
    Additional alignment costs may apply.

    INSTALLATION HEADLAMP AIM NOTE
    Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
    Additional headlamp adjustment costs may apply.

    ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
    If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
    This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
    Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
    Additional ADAS calibration costs may apply.


    DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. TeraFlex is NOT responsible for any damage or failure resulting from improper installation.
    Estimated Labor Time: 1 Hour
    Installation Effort: 1 Hour

    Have a certified mechanic do it for you!

  • • Drilling is REQUIRED. Vehicle(s): • JL Wrangler (2-door) – Right-Hand Drive • JL Wrangler Unlimited (4-door) – Right-Hand Drive Specs: • Lift Height: 2.5–4.5”


Description
The TeraFlex JL: Rear Lower Track Bar Bracket Kit corrects vehicle roll center, restores factory handling, and reduces body roll on lifted JL Wrangler/Unlimited models. Bolts to the rear axle track bar mount.
Details
The TeraFlex JL: Rear Lower Track Bar Bracket Kit corrects vehicle roll center, restores factory handling, and reduces body roll on lifted JL Wrangler/Unlimited models.

Multiple mounting locations allow neutral lateral alignment of the rear axle of JL models with 2.5–4.5” lifts. Includes a Track Bar Bracket Spacer. Bolts to the rear axle track bar mount.

Kit Components
• Track Bar Bracket – Rear Lower w/ multiple track bar mounting holes

• Track Bar Bracket Spacer

• All necessary hardware
Safety & Warnings

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Installation

ADDITIONAL SERVICES & COSTS MAY BE REQUIRED

INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.

INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.

ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.


DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. TeraFlex is NOT responsible for any damage or failure resulting from improper installation.

Have a certified mechanic do it for you!

Additional Information

• Drilling is REQUIRED. Vehicle(s): • JL Wrangler (2-door) – Right-Hand Drive • JL Wrangler Unlimited (4-door) – Right-Hand Drive Specs: • Lift Height: 2.5–4.5”