JT: 3.5" Lift Outback Coil Spring Pair - Front.

TeraFlex JT: Lift Coil Springs are engineered for your JT Jeep Gladiator. Our engineers focused on extensive rate tuning and dynamic balance between front and rear and side-to-side load bias to produce Lift Coil Springs that deliver improved highway handling and off-road performance.

Up front, we chose progressive dual-rate lift coil springs that provide optimal performance both on and off road. These progressive dual-rate coil springs provide consistent performance and predictable handling throughout normal street driving - just like a linear rate spring. When the axle begins to droop, the softer sprung upper section of the coil spring begins to unwind for maximum flex and spring retention.

We recommend pairing TeraFlex Lift Coil Springs with Falcon Performance Shocks for superior performance. TeraFlex Lift Coil Springs and Falcon Performance Shocks have been engineered together to improve both compression and rebound for optimal vehicle stability.

Fitment and Installation Notes

• - Designed for the additional cargo demands of overland driving
• - Load-enhanced heavy-rate lift coil springs
• - Shot peened to reduce spring sag and fatigue as well as increase life
• - Powder coated for superior element protection
• - Limited Lifetime Warranty against defects

- Vehicle Fitment Info
- JT Gladiator (pickup)
- Specs
- Lift Height: 3.5"
- Product Notes
- These application-specific load-enhanced heavy-rate lift coil springs will provide a firmer ride with an empty payload
- 3.0L EcoDiesel V-6 models REQUIRE the 1" Front Coil Spring Spacer Adjustment Kit (# 1155100) to properly level the vehicle - NOT INCLUDED.
- Advertised lift heights are not actual final lift height. Our JT Gladiator coil springs are designed to correct the factory rake. Front coil springs are actual rated lift height, while rear coil springs are the companion spring used in our suspension lifts. Other variables will affect the actual final lift height such as a winch, aftermarket bumpers, full-size spare tire, loaded cargo weight, etc.
- Lift height is engineered with an expected load of 500 lbs. in the bed

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.