JT: Alpine IR Short Control Arm Kit - Rear Upper (0-4.5" Lift).

Our innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping. These maintenance-free bushings improve on- and off-road ride quality and performance. TeraFlex JT: Alpine IR Short Control Arms provide maximum performance on JT Gladiator with 0-4.5" lifts. Bolts to the factory brackets. Our innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping.

Fitment and Installation Notes

• - Color: 12mm X 100
• - JL / JT Alpine IR Short Control Arms:
• - Adjustable Alpine IR Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 2-4" lift kits
• - Alpine IR Short Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength
• - Bolts to the factory control arm mounting brackets
• - Install and drive simple bolt-on installation - no welding required
• - JL / JT Alpine IR Control Arms (all):
• - Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
• - Full range of movement will not restrict articulation or flex off-road
• - Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping
• - Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• - Zero maintenance forged threaded joints for smooth quiet flex
• - Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance
• - Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
• - TeraFlex Lifetime Warranty against defects
• - Fitment: Fits:
• - Fitment: JT Gladiator (pickup)
• - Fitment: 0-4.5" Lift
• - Fitment: Control Arm Specs:
• - Fitment: Tube Diameter & Wall = 42mm x 4mm
• - Fitment: Factory Length = 16-3/8"
• - Fitment: Min. Length = 16-1/8"
• - Fitment: Max. Length = 17-3/8"
• - Fitment: Both Ends = 16mm Bolt
• - Height: 3
• - Installation Time: 2 Hours
• - Length: 20
• - Product Image Size: Default
• - Note: Alignment REQUIRED.
• - Size: 2XL
• - Featured: No
• - Width: 7

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.