JT: Alpine Long Arm Pair - Rear Lower (3-6" Lift).

High-quality, dependable, maintenance-free, factory'style bushings provide excellent NVH damping and ride quality. Can be added to any existing suspension lift. TeraFlex JT: Alpine Long Arms and Long Arm Brackets provide maximum performance on JT Gladiator models with 3-6" lifts. Factory-style bushings provide excellent NVH damping and ride quality.

Fitment and Installation Notes

• - Alpine Control Arms (Short / Long):
• - High-quality, dependable, maintenance-free, factory'style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality
• - JL / JT: Long Control Arms (Alpine/IR) and Long Arm Brackets:
• - Adjustable Long Control Arms and Long Arm Brackets (NOT INCLUDED) balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits
• - Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
• - On higher lifts, bolt-on Long Arm Brackets (NOT INCLUDED) reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop and shock load transferred through the Long Control Arms
• - Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits
• - Long Arm Brackets feature a premium triple-stage powder coating that provides superior durability and corrosion resistance
• - Front Long Arm Suspension Crossmember (NOT INCLUDED) provides additional strength
• - Install and drive simple bolt-on installation - no welding required
• - Adjustable Control Arms (all):
• - Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
• - Full range of movement will not restrict articulation or flex off-road
• - Zero maintenance forged threaded joints for smooth quiet flex
• - Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance
• - Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
• - TeraFlex Lifetime Warranty against defects
• - Fitment: Vehicle(s):
• - Fitment: JT Gladiator (pickup)
• - Fitment: Specs:
• - Fitment: Lift Height: 3-6"
• - Fitment: Control Arm Specs:
• - Fitment: Tube Diameter & Wall: 50mm x 5mm
• - Fitment: Factory Length: 23-3/4"
• - Fitment: Min. Length: 47-3/4"
• - Fitment: Max. Length: 49"
• - Fitment: Bolt
• - Fitment: Both: 16mm
• - Fitment: Bushing
• - Fitment: Both: 09-01-201-001
• - Height: 5
• - Installation Time: 2 Hours
• - Length: 48.5
• - Product Image Size: Default
• - Note: Adjustable Long Control Arms (JT: Alpine: # 1317005) (JT: Alpine IR: # 1318005) MUST be used with Long Arm Bracket Kit (JT: # 1968000) - NOT INCLUDED.
• - Note: REQUIRES cutting/removal of factory control arm bracketry to install Long Arm Brackets.
• - Note: JT: Long Arm Brackets (# 1968000) are NOT COMPATIBLE with all rock sliders. Some rock sliders may require disassembly for install.
• - Note: Alignment REQUIRED.
• - Note: Available RockGuard Transmission Skid Plate & Long Arm Crossmember Reinforcement (JL / JT: # 4609100) protects your transmission and reinforces your Front Long Arm Suspension Crossmember. RECOMMENDED.
• - Note: Upgrade your Long Control Arm Bushings: with our IR Bushing Kit (JL: 8 Long Arms: # 1952801).
• - Note: Bushing:
• - Note: Front Upper (JL / JT
• - Note: Axle: # OEM) (JL / JT
• - Note: Frame: # 611012)
• - Note: Front Lower (JL / JT: # 09-01-201-001 x 2)
• - Note: Rear Upper (JL
• - Note: Axle: # 611012) (JL
• - Note: Frame: # 611011) (JT: # 09-01-201-001x 2)
• - Note: Rear Lower (JL: # 611011 x 2) (JT: # 09-01-201-001x 2)
• - Note: Replacement Tool Kit (# 1952900)
• - Featured: No
• - Width: 10