TeraFlex JT: Alpine Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JT Gladiator models with 0-4.5" lifts. Bolts to the factory control arm mounting brackets. Can be added to any existing suspension lift.
High-quality dependable maintenance-free factory-style bushings provide excellent NVH damping and ride quality.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

color=12mm X 100,features_benefits=JL / JT Alpine Short Control Arms

• Adjustable Alpine Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4.5" lift kits
• Alpine Short Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength
• Bolts to the factory control arm mounting brackets JL / JT Alpine Control Arms (all):
• Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
• Full range of movement will not restrict articulation or flex off-road
• High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality
• Zero maintenance forged threaded joints for smooth quiet flex
• Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance
• Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
• Install and drive simple bolt-on installation
• no welding required
• TeraFlex Lifetime Warranty against defects ,fitment_info=Fits:
• JT Gladiator (pickup)
• 0-4.5" Lift Control Arm Specs: JL / JT: Alpine Short Control Arm Kit
• Front Upper (# 1416520):
• Tube Diameter & Wall = 42mm x 4mm
• Factory Length = 20.185"
• Min. Length = 20"
• Max. Length = 21"
• Both Ends = 14mm Bolt JL / JT: Alpine Short Control Arm Kit
• Front Lower (# 1416500):
• Tube Diameter & Wall = 42mm x 4mm
• Factory Length: 24"
• Min. Length: 24"
• Max. Length: 25.25"
• Both Ends: 16mm Bolt JT: Alpine Short Control Arm Kit
• Rear Upper (# 1417530):
• Tube Diameter & Wall = 42mm x 4mm
• Factory Length = 16-3/8"
• Min. Length = 16-1/8"
• Max. Length = 17-3/8"
• Both Ends = 16mm Bolt JT: Alpine Short Control Arm Kit
• Rear Lower (# 1417540)
• Tube Diameter & Wall = 42mm x 4mm
• Factory Length = 23-3/4"
• Min. Length = 23-1/2"
• Max. Length = 24-3/4"
• Both Ends = 16mm
• Both Bushings = # 611011 ,height=6,installation_time=5 Hours,installation_video=https://www.youtube.com/embed/wC3K37wPLeQ,length=27,product_notes=
• Alignment REQUIRED. ,size=2XL,width=14