JT: Forged ST Sway Bar Kit - Rear (1.5"+ Rear Lift).

The frame-mounted TeraFlex Rear Forged ST (Street & Trail) Sway Bar Kit allows more rear suspension travel than the axle-mounted factory rear sway bar. This kit allows up to 16" of rear wheel travel, while providing the same stability as the factory sway bar. Additionally, relocating the rear sway bar prevents damage to the sway bar.

The TeraFlex Rear Forged ST (Street & Trail) Sway Bar Kit allows up to 16" of rear wheel travel, while providing the same stability as the factory sway bar. Additionally, relocating the rear sway bar prevents damage to the sway bar.

Fitment and Installation Notes

• - Color: 12mm X 100
• - Allows for up to 16" of wheel travel
• - Relocates the sway bar from the axle to the frame to prevent damage to the sway bar
• - Provides same stability as factory rear sway bar
• - Requires a minimum of 2" rear bump stop
• - Sport/Overland fenders and Rubicon fenders require 2.5" Front and 2.5" Rear Bump Stop/Strike Pad Extensions/Shims to fit 35 tires and 37" tires, respectively.
• - Forged and heat-treated 4140 Rear Sway Bar with hex head design
• - Features curved Forged Sway Bar Arms for clearance through full suspension movement
• - OEM-style Teflon-coated Sway Bar Bushings for reduced noise and long life
• - Includes Rear Sway Bar Links, Frame Mounting Brackets, and extruded aluminum Axle Mounting Brackets
• - Fitment: Fits:
• - Fitment: JT Gladiator (pickup) with 1.5"+ Rear Lift
• - Fitment: Max Tire Diameter:
• - Fitment: Sport/Overland Fenders: 35" (2.5" rear bump stops)
• - Fitment: Rubicon Fenders: 37" (2.5" rear bump stops)
• - Height: 7
• - Installation Time: 4 Hours
• - Length: 52
• - Product Image Size: Default
• - Note: Requires aftermarket wheels with 4.75" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.
• - Note: May require additional components including JT: Extended-Travel Shock Accessory Kit (# 4834100) Rear Upper Control Arm Extended-Travel Axle Bracket Kit (# 1938225), Rear Forged ST Sway Bar Kit (# 1774700), 1.5" Rear Driveline Center Support Mount Lowering Spacer Kit (# 4801000), Rear Upper & Rear Lower Coil Spring Retainer Kit (# 4954000), and Rear Brake Line Anchor Kit (# 1101455).
• - Note: Does NOT work with the 13" Rear Sway Bar Link Kit with Swivel Stud (# 1774300).
• - Note: Requires a minimum of 2.5" bump stop.
• - Note: Sport/Overland fenders and Rubicon fenders require 2.5" Front and 2.5" Rear Bump Stop/Strike Pad Extensions/Shims to fit 35 tires and 37" tires, respectively.
• - Size: 2XL
• - Featured: No
• - Width: 10

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

installation_video=https://www.youtube.com/embed/r-0Mj4sulQs