Olympus Beadlock Off-Road Wheel - 5x5" -25mm - Machined
Olympus Beadlock Off-Road Wheel - 5x5" -25mm - Machined.
- - Round out your build with a set of these tough and durable TeraFlex Olympus Beadlock Off-Road Wheels.
- - Cast from heat treated A356-T6 aluminum
- - Strong enough to handle 40" tires
- - Air Deflator Valve allows you to quickly air down your tires to a preset pressure
Description
Olympus Beadlock Off-Road Wheel - 5x5" -25mm - Machined.
- - Round out your build with a set of these tough and durable TeraFlex Olympus Beadlock Off-Road Wheels.
- - Cast from heat treated A356-T6 aluminum
- - Strong enough to handle 40" tires
- - Air Deflator Valve allows you to quickly air down your tires to a preset pressure
Olympus Beadlock Off-Road Wheel - 5x5" -25mm - Machined.
Round out your build with a set of these tough and durable TeraFlex Olympus Beadlock Off-Road Wheels. These cast alloy wheels feature a reinterpretation of the classic eight-hole design. Engineered with a "form follows function" philosophy resulting in a technical look. Round out your build with a set of these tough and durable TeraFlex Olympus Beadlock Off-Road Wheels. The modular plug system accepts our proprietary Air Deflator Valve that allows you to quickly air down your tires to a preset pressure.
Fitment and Installation Notes
- - Olympus Beadlock Off-Road Wheel:
- - Cast from heat treated A356-T6 aluminum
- - Strong enough to handle 40" tires
- - Locking beads seat knurling allows for safely running lower air pressure
- - Lack of "water troughs" prevents water pooling
- - Dual-stage clear powder coat with UV inhibitors
- - Easy to clean finish
- - Modular Plug System accepts Air Deflator Valve, Schrader Valve Stem Housing & Cap, or Air Deflator Plug
- - Symmetrical valve holes for balance
- - Fully encapsulated Schrader Valve to keep out contaminants
- - Air Deflator Valve:
- - Air Deflator Valve allows you to quickly air down your tires to a preset pressure
- - Adjustment screw sets spring preload
- - Allows pressure to be preset to as low as 10 psi
- - Releases up to 40x more air than Schrader valve for quick air down
- - O-ring seal ensures air blows contaminates away from air release orifices
- - Viton O-ring can be changed with out disassembly
- - O-ring seals pressures up to 3,500 psi
- - Black and red anodized finish
- Olympus Beadlock Off-Road Wheel
- Air Deflator Valve (# 1056000)
- Schrader Valve Stem Housing & Cap (# 1056001)
- Center Cap - 5x5" (# 1056004)
- Vehicle Fitment Info
- JL Wrangler (2-door)
- JL Wrangler Unlimited (4-door)
- JT Gladiator (pickup)
- JK Wrangler (2-door)
- JK Wrangler Unlimited (4-door)
- Specs
- Diameter x Width: 17" x 9"
- Bolt Pattern: 5x5"
- Offset: -25mm
- Back Spacing: 4.00"
- Hub Bore: 71.5mm
- Finish: Machined Wheel with Machined Beadlock
- Product Notes
- NOT recommended for use with balance beads or fix-a-flat tire sealants.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.

