Safari Tailgate Table
Safari Tailgate Table.
- - The TeraFlex Safari Tailgate Table is designed for quiet versatility and functionality, with built-in features including cup holders, cutting board, and optional Molle Panel mounts in a rattle-free design.
- - Crafted with durability in mind, the table is made from 2mm steel, while the mounting brackets are 3mm steel.
- - It boasts a robust load capacity of up to 75 lbs.
- - The powder-coated black finish allows for easy cleaning and added durability.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. TeraFlex is NOT responsible for any damage or failure resulting from improper installation.Estimated Labor Time: 2 HoursInstallation Effort: 2 HoursHave a certified mechanic do it for you!
Description
Safari Tailgate Table.
- - The TeraFlex Safari Tailgate Table is designed for quiet versatility and functionality, with built-in features including cup holders, cutting board, and optional Molle Panel mounts in a rattle-free design.
- - Crafted with durability in mind, the table is made from 2mm steel, while the mounting brackets are 3mm steel.
- - It boasts a robust load capacity of up to 75 lbs.
- - The powder-coated black finish allows for easy cleaning and added durability.
Safari Tailgate Table.
Crafted with durability in mind, the table is made from 2mm steel, while the mounting brackets are 3mm steel. It boasts a robust load capacity of up to 75 lbs. The powder-coated black finish allows for easy cleaning and added durability. Installation on the Jeep JL is quick and clean, utilizing existing tailgate mounting points, with all hardware included. Hardware templates are also provided for the JK and Bronco, ensuring hassle-free Nutsert placement. The table arrives fully assembled.
Fitment and Installation Notes
- - 12mm X 100 Features and Benefits Specs: - Mount Plate: 3mm Steel - Table: 2mm Steel - Load Capacity: - Table Down (Vehicle Stationary): 75 lbs - Table up (Vehicle in Motion) 35 lbs - Finish: Powder-Coated Black ,Vehicle fitment info: - 6G Bronco, JK, and JL Wrangler - Not compatible with JK/JL OEM rear sub woofer Installation time 2 Hours
- - installation_video= Product Notes: - Includes: - All Hardware for Installation on Jeep JK, JL, or Bronco - Nutsert Install Kit - Installation templates for Nutserts - Table Comes Fully Assembled - Cutting Board Included - Not compatible with JL tail gates with the Jeep ''Trail Rail'' system - Not compatible with JK/JL OEM rear sub woofer
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
Have a certified mechanic do it for you!
installation_video=https://www.youtube.com/embed/1-drsnbYXSI?si=GqqZ1rE-DW7GoWmG
TIRE/WHEEL SIZING GUIDE