TJ: High Steer Drag Link & Tie Rod End Replacement Kit with Insert Sleeves.
- The complete TeraFlex TJ: High Steer Drag Link & Tie Rod End Replacement Kit includes all of the components needed to raise or flip" the tie rod over the knuckle to increase ground clearance an additional 3" for added tie rod protection.
Fitment and Installation Notes
- "Flipping" the tie rod requires drilling the driver side knuckle taper to a 0.75" hole.
TJ: High Steer Drag Link & Tie Rod End Replacement Kit with Insert Sleeves.
The complete TeraFlex TJ: High Steer Drag Link & Tie Rod End Replacement Kit with Insert Sleeves includes all of the components needed to raise or flip" the tie rod over the knuckle to increase ground clearance an additional 3- for added tie rod protection. The kit can also be used to rebuild an existing High Steer HD Aluminum Drag Link Kit and High Steer HD Aluminum Tie Rod Kit.
The complete TeraFlex TJ: High Steer Drag Link & Tie Rod End Replacement Kit includes all of the components needed to raise or flip" the tie rod over the knuckle to increase ground clearance an additional 3" for added tie rod protection.
Fitment and Installation Notes
- Upgrade kit only works with TeraFlex TJ: Dana 30/44 High Steer Systems (Pro LCG: # 1849000 & 4"+ Lift: # 1813000) or TeraFlex High Steer Knuckle (# 4828490).
- "Flipping" the tie rod requires drilling the driver side knuckle taper to a 0.75" hole. Use TJ: Tie Rod/Drag Link Stock Tapered Insert Sleeve (0.75" O.D.) (# 990175).
- Tie Rod Ends are either 7/8"" x 18
- Left-Hand Thread or 7/8"" x 18
- Right-Hand Thread.
Have a certified mechanic do it for you!
- Color: 12mm X 100
- Fitment: TJ Wrangler (short wheelbase)
- Fitment: LJ Wrangler Unlimited (long wheelbase)
- Height: 5
- Length: 7.5
- Product Image Size: Default
- Note: Upgrade kit only works with TeraFlex TJ: Dana 30/44 High Steer Systems (Pro LCG: # 1849000 & 4"+ Lift: # 1813000) or TeraFlex High Steer Knuckle (# 4828490).
- Note: "Flipping" the tie rod requires drilling the driver side knuckle taper to a 0.75" hole. Use TJ: Tie Rod/Drag Link Stock Tapered Insert Sleeve (0.75" O.D.) (# 990175).
- Note: Tie Rod Ends are either 7/8"" x 18
- Note: Left-Hand Thread or 7/8"" x 18
- Note: Right-Hand Thread.
- Size: 2XL
- Featured: No
- Width: 7.5
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
Description
TJ: High Steer Drag Link & Tie Rod End Replacement Kit with Insert Sleeves.
- The complete TeraFlex TJ: High Steer Drag Link & Tie Rod End Replacement Kit includes all of the components needed to raise or flip" the tie rod over the knuckle to increase ground clearance an additional 3" for added tie rod protection.
Fitment and Installation Notes
- "Flipping" the tie rod requires drilling the driver side knuckle taper to a 0.75" hole.
Details
TJ: High Steer Drag Link & Tie Rod End Replacement Kit with Insert Sleeves.
The complete TeraFlex TJ: High Steer Drag Link & Tie Rod End Replacement Kit with Insert Sleeves includes all of the components needed to raise or flip" the tie rod over the knuckle to increase ground clearance an additional 3- for added tie rod protection. The kit can also be used to rebuild an existing High Steer HD Aluminum Drag Link Kit and High Steer HD Aluminum Tie Rod Kit.
The complete TeraFlex TJ: High Steer Drag Link & Tie Rod End Replacement Kit includes all of the components needed to raise or flip" the tie rod over the knuckle to increase ground clearance an additional 3" for added tie rod protection.
Fitment and Installation Notes
- Upgrade kit only works with TeraFlex TJ: Dana 30/44 High Steer Systems (Pro LCG: # 1849000 & 4"+ Lift: # 1813000) or TeraFlex High Steer Knuckle (# 4828490).
- "Flipping" the tie rod requires drilling the driver side knuckle taper to a 0.75" hole. Use TJ: Tie Rod/Drag Link Stock Tapered Insert Sleeve (0.75" O.D.) (# 990175).
- Tie Rod Ends are either 7/8"" x 18
- Left-Hand Thread or 7/8"" x 18
- Right-Hand Thread.
Installation
Have a certified mechanic do it for you!
F&B
- Color: 12mm X 100
- Fitment: TJ Wrangler (short wheelbase)
- Fitment: LJ Wrangler Unlimited (long wheelbase)
- Height: 5
- Length: 7.5
- Product Image Size: Default
- Note: Upgrade kit only works with TeraFlex TJ: Dana 30/44 High Steer Systems (Pro LCG: # 1849000 & 4"+ Lift: # 1813000) or TeraFlex High Steer Knuckle (# 4828490).
- Note: "Flipping" the tie rod requires drilling the driver side knuckle taper to a 0.75" hole. Use TJ: Tie Rod/Drag Link Stock Tapered Insert Sleeve (0.75" O.D.) (# 990175).
- Note: Tie Rod Ends are either 7/8"" x 18
- Note: Left-Hand Thread or 7/8"" x 18
- Note: Right-Hand Thread.
- Size: 2XL
- Featured: No
- Width: 7.5
Additional Information
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
Warning:This product can expose you to chemicals include [name of chemical], which [is/are] known to the State of California to case [cancer]/[birth defects or other reproductive harm]. For more information go to www.P65Warnings.ca.gov.
TIRE/WHEEL SIZING GUIDE