Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Drag Link Kit. The High Steer HD Aluminum Drag Link and Tie Rod (NOT INCLUDED) can be used to convert the TJ-s stock steering to a cross steering or a flipped steering setup.
Flipping" the High Steer HD Aluminum Drag Link over the Knuckle helps eliminate front-end shimmy bump steer and other alignment issues.
Requires the TeraFlex TJ: Dana 30/44 High Steer Knuckle (# 4828490) and TJ: High Steer HD Aluminum Tie Rod Kit (Offset Stock Taper Ends: # 4920251 or Stock Taper Ends: # 4920255).

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

color=12mm X 100,features_benefits=- Bolts directly to new High Steer Knuckle - Can be used to convert to cross steering or over the knuckle for flipped steering - Helps eliminate front end shimmy and other alignment issues - Extruded drag link eliminates excess flex during binding and high load steering maneuvers - Constructed from 1.5" hexagonal 6061-T6 aluminum - higher specific strength than 1018 steel - Yield strength of 45,000 lbs., yet 1/3 the weight of steel - Aluminum construction deflects 3x further than steel allowing for return to its original shape - Hexagon shape allows tightening of jam nuts w/ 1.5" wrench - Tie rod end features 4140 chromoly ball/stud and 1045 carbon steel housing ,fitment_info=- TJ Wrangler (short wheelbase) - LJ Wrangler Unlimited (long wheelbase) - ZJ Grand Cherokee - XJ Cherokee - MJ Comanche - Dana 30 front axle - Rubicon Dana 44 front axle - 4-6" Lift ,height=4,installation_time=4-5 hours,length=37,product_image_size=Default,size=2XL,sw_featured=No,width=4