JK Wrangler/Unlimited: Interior and Engine Accessory Guide
Interior Accessories
TeraFlex Windshield Sunshade
Reduce interior temperatures with the attractive TeraFlex JK: Windshield Sunshade. The thick 6mm (1/4”) double layer insulation blocks UV rays that can damage the dashboard and interior pieces. Folds easily and stays organized with elastic straps.
Don’t let their good looks fool you; these TeraFlex Grab Handles put function first. Just ask any passenger what they grab onto when the going gets tough. Simply mount the grab handles to the roll cage to give the driver and passengers something secure to grab onto.
JK: Grab Handle Pair – Front — Also FITS: 2003–06 TJ Wrangler/Unlimited (front) & 1997–02 TJ Wrangler (rear)
1184120 – JK 4dr: ARB Air Compressor Under Seat Mount Kit
The TeraFlex JK 4dr: ARB Air Compressor Under Seat Mount Kit places your ARB On-Board High-Performance 12-Volt Twin Air Compressor conveniently under the front passenger seat (driver seat of 2007 model year) of your 4-door JK Wrangler Unlimited protecting it from the elements. This kit also allows the manifold and locker solenoids to be mounted next to the compressor for simple hose routing. It includes a vent exhaust hose kit to safely route fumes to the exterior of the vehicle.
2012–2018 JK: ARB Air Compressor Under Hood Mount Kit
1184220 – 2012–2018 JK: ARB Air Compressor Under Hood Mount Kit
The TeraFlex 2012–2018 JK: ARB Air Compressor Under Hood Mount Kit is perfect for those who want to mount a small ARB air compressor under the hood of a 2012–2018 JK Wrangler/Unlimited.
This kit places the compressor on the left-hand side of the engine compartment near the ABS module for maximum protection from damage and environmental elements. The laser-cut and bent brackets feature an attractive black powder coat finish.
2012–2018 JK: ARB Air Compressor Under Hood Mount Kit
2012–2018 JK: Vacuum Pump Relocation Kit
4403100 – 2012–2018 JK: Vacuum Pump Relocation Mount Bracket Kit
Some aftermarket front bumpers and/or winches for 2012–2018 JK Wrangler/Unlimited models with the 3.6-liter Pentastar V-6 require the vacuum pump to be relocated from the front crossmember to the inside of the engine bay. Our simple 2012–2018 JK: Vacuum Pump Relocation Kit moves the vacuum pump safely and securely into the engine bay.
The TeraFlex 2012–2018 JK: Exhaust Spacer Kit is required for all 2012–2018 JK Wrangler/Unlimited models with 2.5” or more lift. Prevents contact between the front driveshaft and the exhaust crossover pipe during suspension down travel. Installs between the exhaust header flanges and the crossover pipe flanges to move the crossover pipe rearward for proper driveshaft clearance. Bolt-on installation.
