JT: Falcon 1.1 Monotube Shock Kit (2-3.5" Lift).

Falcon 1.1 Monotube Shocks deliver increased stability, improved ride quality, and comfort for daily driven Jeeps in a compact and affordable package. 1.1 Series Shocks have been optimized for on-road driving with increased stability over stock for off-road driving. "High-Value Performance" is the driving force behind our vehicle-specific dampers for Jeeps, trucks, and SUV's. These Jeep'specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles on and off road.

JT Falcon 1.1 Monotube Shocks deliver affordability, improved ride quality, stability, and comfort for daily driven Jeeps. You will love the quality as well as the on and off-road performance that the Falcon 1.1 series shocks provide. Front #61-99-01-001

Fitment and Installation Notes

• - Color: 12mm X 100
• - Vehicle-specific shock absorbers
• - Race-inspired performance for increased vehicle stability
• - Improved dynamic roll control and low-speed damping
• - Dramatic improvement in on-road comfort and off-road performance
• - Optimized fitment for unobstructed suspension travel and articulation - 2-1/8" shock body for high value performance - 6061-T6 aluminum alloy shock body resists Impact to protect internal components
• - Smooth honed internal shock body surface for long-term performance - 0.5" induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling - 1-piece energized Teflon bronze piston wear band
• - OGS (Oil/Gas Separator) prevents cavitation
• - Red Line oil for consistent performance across all temperatures - 1,000-hour salt spray corrosion resistance test on all hardware
• - Serviceable and rebuildable (factory serviced)
• - Designed, engineered, CNC machined, and assembled in-house from domestic and globally sourced components
• - Patented design - 1-year warranty
• - Fitment: JT Gladiator all Motor configurations Specs:
• - Fitment: Lift Height: 2-3.5"
• - Height: 4
• - Installation Time: 1.5 Hours
• - Length: 37
• - Product Image Size: Default
• - Note: Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders
• - Note: See instructions for proper configuration for your application.
• - Note: Requires 2" Bump Stops Front and Rear. Strike Pad Extension Kit (#12-01-109-200) Front, and (#12-01-309-150) bump stop extension kit Rear, or similar.
• - Note: Requires 13" Rear sway bar link extensions (#1774300) or similar
• - Size: 2XL
• - Featured: No
• - Width: 14

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

installation_video=https://www.youtube.com/embed/u1_DMvn3Y8A?si=ecD_Y1U_-koXGSOP